Assembly Instructions - thomann Startone MK-201 User Manual

Assembly instructions

4 Assembly instructions
Power supply
MK-201
10
Keyboard
Unpack and check carefully there is no transportation damage before using the unit.
Keep the equipment packaging. To fully protect the product against vibration, dust
and moisture during transportation or storage use the original packaging or your
own packaging material suitable for transport or storage, respectively.
Set up the device in the desired location.
The device can be powered by batteries or with the included power supply.
NOTICE!
Possible damage due to leaking batteries!
Batteries can leak and cause permanent damage to the device.
Take the batteries out of the device if it is not going to be used for an
extended period of time.
NOTICE!
Risk of fire due to incorrect polarity!
Incorrectly inserted batteries may cause fires and destroy the device and
the batteries.
Observe the markings on the batteries and on the device.
Ensure that proper polarity is observed when inserting batteries.
Inserting batteries
1.
Turn the volume control anti-clockwise to minimum before inserting the bat‐
teries into the keyboard. This is to protect the speakers from damage.
2. Open the battery compartment cover on the underside of the device and
insert six AA size batteries. Pay attention to the correct polarity.
Always use batteries of the same type and do not use new and used batteries
at the same time.
3.
Reattach the battery compartment cover and snap it into place.
Power supply
1.
Make sure that the device is turned off before you connect it to the supply
voltage or disconnect it.
2. Turn the volume control anti-clockwise to minimum before connecting the
keyboard to the supply voltage. This is to protect the speakers from damage.
3.
Connect the cable from the power supply outlet to the [DC IN] socket on the
back of the keyboard.
4.
Plug the power adapter into a properly wired mains wall outlet.