Advertisement
Step 2:
Orient the Bracket RH (4) in-line
with the Mounting Holes of the OE
Bracket (as shown in "Red") and
slip-in the Washer M6 (6) – 2 off,
Screw M6 x 15 (9) – 2 off, Delrin
Bush (10) & Rubber Spacer (11) – 2
off in positions as shown and secure
the threads.
The Mounting Pin (2) – 2 off can be
assembled to the Bracket. The same
can be assembled Off-line too.
Step 3:
Repeat the Step 2 for mounting the
Bracket (LH) (5), as shown
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 1:
Unscrew the mounting screws and
remove the Windshield Guard to enable
access and fitment of the Bracket RH (4)
and Bracket LH (5)
Page 3
Advertisement
