Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
ALARM AND PAPER OUT INDICATORS
.
PROBLEM
CAUSE AND REMEDY
E When the PAPER OUT indicator lights;
The recording paper is finished, replace it.
E When the ALARM indicator lights during
A recording paper jammed during reception.
copying and receiving;
E When the ALARM Indicator lights;
eConfirm that the cover of the unit is closed
à
firmly.
eThe OGM is not recorded.
@ When the ALARM indicator lights and
Leave the unit as it is. Operation will
the unit does not function (overheat);
automatically resume as soon as the unit
has cooled. Do not unplug the unit.
ll When the ALARM indicator lights
e When you transmit a document which is longer
during transmission;
than 600 mm (23 5/8^), the alarm may sound.
eA document jams during transmission.
elf you have call waiting service, it may have
been activated by another telephone call.
Re-connect the unit to a line that does not have
call waiting service.
lll When the ALARM indicator flashes
The document was not transmitted, try again.
after transmission;
` '
Confirm by examining the TX report.
PROBLEM
CAUSE AND REMEDY
E Recording image is scratchy and
The sender transmitted a light density document.
cannot be read completely.
Have the other sender darken the document (e.g.
by copying) then have them transmit it again.
E The document is not pulled into the
To insert a document firmly hold it with both
unit.
hands approx. 3 to 5 inches from the top. If
feeding cannot be done, clean the paper roller.
E The recording paper jams during
Make sure that the recording paper has no slack.
reception.
Advertisement
Table of Contents
