Table of Contents
Advertisement
OTHER FEATURES
Mute Operation
Use this feature when you do not want your voice to be heard by the other party.
t
-E EÍ MUTE
Push MUTE.
e The MUTE indicator will light.
eTo resume the conversation;
push the MUTE button again. The MUTE
indicator will go out.
Flash Button Usage
FLASH
You can access some of the features of your
host PBX by using the FLASH button. This is
done by pushing the FLASH button lightly
when required.
"FLASH" can also be registered in memory
the same as "Programming One-Touch
Dialing Numbers" on page 1-8.
Tone Button Usage
If you wish to change from PULSE to TONE
while dialing, you may do so by pushing
the "POUND SIGN (X)" button instead of
Tene
changing the DIALING MODE selector.
eWhen you hang up, the unit will automatically
return to the pulse mode.
ePushing the TONE button counts as 1 digit
while registering.
Combination Dialing
Any of the following dialing combinations is possible.
E Automatic and manual dialing
W Pulse and tone dialing
@ Piural memory stations
3-3
Advertisement
Table of Contents
