Care And Maintenance - Westinghouse WKMCGO01WH Instructions Manual

2. Place the food into the Container Bowl. Do not fill past the maximum capacity of 1½
cups.
3. Attach and gently secure the Cover onto the Container Bowl (reference the "To
Assemble" section).
4. Plug the product into a standard 110-120 volt AC electrical outlet.
5. Press the On/Pulse Button to begin processing the food.
6. To stop processing, release the On/Pulse Button.
7. Wait until the Blades and Metal Shaft have completely stopped before removing the
Cover or any contents.
8. Unplug the product from the electrical outlet when it is not in use or is left
unattended.
WARNING: Overfilling the Container Bowl could cause spillage, resulting in serious
burns and/or property/product damage.
Tips:
• For liquid ingredients, place a maximum volume of ¾ cup when filling the Container
Bowl.
• For better processing control, briefly press the On/Pulse Button and then release.
• To make bread crumbs, break the bread into pieces before placing them into the food
processor.
• To use cracker or cookie crumbs as recipe ingredients or in pie crusts, break them
into pieces before placing them into the food processor.
• To chop vegetables (e.g., carrots, celery, mushrooms, green peppers, onions): cut
the vegetables into 1" (approx. 2½ cm) chunks before processing them in the
Container Bowl. This will allow more consistent chopping of the vegetables.
• Use the mini chopper to mince parsley, basil, chives, or garlic.
• Use the mini chopper to puree small amounts of cooked fruits or vegetables for baby
food or as bases for sauces or soups.

CARE AND MAINTENANCE

WARNING: To avoid the risk of electric shock, always ensure the product is unplugged
from the electrical outlet before assembling, disassembling, relocating, servicing, or
cleaning it.
WARNING: Handle the Blades with care as they are extremely sharp. Use caution when
attaching, detaching, cleaning, or storing the Blades.
• Always clean the product immediately after each use.
• Wash the Cover, Container Bowl, and the Blades in warm, soapy water; rinse and let
dry.
• Clean the Base by wiping it with a damp cloth. To avoid product damage, do not
9
EN