READ THIS FIRST Warning: NEVER store a loaded fi rearm in the Hornady Security RAPiD ® ® Safe Ready Vault under any circumstances. The risks associated with ™ storage of a loaded fi rearm include, but are not limited to, unintentional discharge upon insertion or removal of the fi rearm.
WiFi Connectivity Keep tabs on your Ready Vault™ safe through your smartphone by downloading the Hornady Security app to receive alerts when the ® safe is locked or unlocked. For instructions for downloading the app Download the Hornady and connecting the safe to WiFi, go to www.hornadysecurity.com/app.
Page 5
AC Power Power Jack The RAPiD Safe is designed ® to be powered by either the AC power supply or four AA batteries. To connect the AC power supply, fi rst open the vault with the circular barrel key. Locate the square hole in the back of the vault and insert the power cord into this hole.
Page 6
Battery Power Mode When the RAPiD Safe is unplugged, ® and is operating on battery power, RFID Reader you must press any button on the “H” Button & Key Pad keypad to activate the reader. Pressing any button on the keypad causes the system to go from battery saving mode to ready status.
Page 7
3. Hold the RFID tag within 1" of the illuminated RFID reader area on the vault door. If the programming was successful, the vault should beep two times and the available slot should go from blinking to solid red for approximately ten seconds. NOTE: If the user attempts to program a RFID tag that is already stored in the vault it will beep three times and the RFID tag will not be programmed into the duplicate slot.
Page 8
How to Program Your Key Code A single user defined 4 to 6 digit code can be entered into the RAPiD Safe Ready Vault ® ™ 1. Open the RAPiD Safe with either the key, a previously programmed RFID tag, or key code.
Page 9
Pull out on bottom of bracket to unlock before lifting up and out of the hole in the wall panel. The Square-Lok panel is compatible with the Hornady Security Dehumidifi ers, ™ LED Lights, Hygrometer, and other accessories (sold separately).
Hornady Security will promptly undertake an investigation ® of such claim. If the warranty claim is covered by the Limited Warranty, Hornady Security ® will, in its sole discretion, repair the defect(s) or replace RAPiD Safe at the expense of ®...
Frequently Asked Questions I’ve lost my keys. Can I get a replacement? Contact Hornady Security at 800-338-3220 and one of our technicians will assist you. ® Where can I find the serial number? The serial number is located on the back of the safe. Prior to mounting the safe, record the serial number for future reference.
Product Registration and Service You must register your product to obtain Warranty Service. Complete the registration form at hornady.com/warranties. To Receive Warranty Service To report a warranty claim, call Hornady at 800-338-3220 to ® request a return authorization number. Returns will not be accepted without prior return authorization by Hornady.
Need help?
Do you have a question about the RAPiD READY VAULT 98196WIFI and is the answer not in the manual?
Questions and answers