Summary of Contents for Hornady Security BIOMETRiC SAFE 98110
Page 1
Owner’s Manual BIOMETRiC SAFE Item No. 98110 This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder. Fold out for mounting template This product has been tested and certified to conform to ASTM F2456, Youth Resistant Firearms Container.
Page 2
Mounting Template READ THIS FIRST Warning: NEVER store a loaded firearm in the Hornady Security Biometric ® Safe under any circumstances. The risks associated with storage of a loaded firearm include, but are not limited to, unintentional discharge upon insertion or removal of the firearm.
Page 3
Table of Contents Warnings and Important Information ..........Page 2 Items Included..................Page 3 Setup and Operation ................Page 4 Warranty ....................Page 9 Product Registration and Service ............Page 10 Frequently Asked Questions ............... Page 10 Mounting Template ................Page 11 Items included with your Biometric Safe 1.
Page 4
Biometric Safe Setup and Operation Congratulations on purchasing the technologically advanced Biometric Safe. You have taken a significant step in securing the safety of your handgun. To achieve the best experience with your Biometric Safe, please read all instructions carefully, and understand its operation. After the Biometric Safe has been taken out of the box, please check to be sure both circular barrel keys fit and unlock your Biometric Safe.
Page 5
To check battery level: 1. Disconnect from AC power source. 2. Press and release any button on the lid. 3. The LED light below the fingerprint scanner will flash. a. Flashing Green – Good battery b. Flashing Yellow – Low battery Lock Tabs c.
Page 6
How to Program Your Scanner Fingerprint The Biometric Safe can store up to five (5) fingerprints. To program a fingerprint: 1. Open the Biometric Safe with either the key or a previously programmed fingerprint or key code. 2. Locate the red program button. Press and release the button to begin programming.
Page 7
5. If the fingerprint does not program into the safe, the program function will time out after ten seconds and the safe will return to normal operation. If multiple attempts to program a fingerprint fails, please contact Hornady at 800-338-3220. 6.
Page 8
How to remove all fingerprint from safe: 1. Open the Biometric Safe with either the key or a previously programmed fingerprint or key code. Locate the red program button. Press and hold the button for five seconds to erase all fingerprints from the safe. All five red LEDs will begin to blink in sequence.
Page 9
This Limited Warranty does not cover any of the following: (a) Damage, deterioration, or malfunction resulting from accident, negligence, misuse, improper installation, or lack of maintenance; (b) Any defects not discovered and reported to Hornady Security ® during the one (1) year warranty period;...
Page 10
Simply complete and return the enclosed product registration card or submit through our website by going to hornady.com/warranties. To Receive Warranty Service In order to report a warranty claim, call Hornady Security at 800-338-3220 to ® request a return authorization number. Returns will not be accepted without prior return authorization by Hornady Security.
Need help?
Do you have a question about the BIOMETRiC SAFE 98110 and is the answer not in the manual?
Questions and answers