Roland GR-20 Owner's Manual page 24

Chapter 3 Editing The Sounds
b4: PITCH BEND 4 Storing the Sounds You
changes down to a semi tone (max.).
When the pedal is pressed, the pitch Create (WRITE)
The sounds you create will be lost if you change the patch or
b5: PITCH BEND 5 simply turn off the power. If you want to keep the
aem When the pedal is pressed, the pitch
b6: PITCH BEND 6
When the pedal is pressed, the pitch
changes down to one octave (max.).
EF: Effect
The pedal will adjust the effect used with-
in each patch.
* The result will differ for each patch.
* For some patches, there will be no effect.
3. Press the [EXP TYPE] button or [EXIT] button to return
to Play mode. 2
* Ifyou want to keep your edited sound, execute Write (p. 24) to
write your settings into a USER patch. i
modifications you've made, you must perform the Write
changes down to a whole tone (max.). procedure.
Press the [WRITE] button.
The BANK indicators will indicate USER, and the
display will blink.
Use the [NUMBER/ VALUE] knob to select the patch
number into which you want to write your settings.
If you decide to abort the Write operation at this point, press
Те [EXIT] button.
Press the [WRITE] button once again.
Your settings will be written into the patch you selected.
Lise caution, since the settings previously stored in that patch
will be overwritten and lost.
The decimal point in the display will blink while the setting is
being stored. Don't turn off the power during this time.