Parts identification
Fig. 1
[7] Remote Controller Sensor
Fig. 2
{21] DSP
Precautions
* Do not place the remote control unit in
high temperatures or in direct sunlight.
Install the batteries in the proper
* direction.
Use only UM-4, AAA, or IEC R03 1.5 V
batteries.
Do not mix old and new batteries.
The batteries provided with the unit are
not rechargeable. Therefore do nat
recharge them.
+ If the remote control unit is not to be used
for more than a month, remove the
batteries.
Parts identification
Fig. 1
[2] Open
[4] Front Panel
111] @ Warning Buzzer ON/OFF
Function