Advertisement
INSTALLATION CONSIDERATIONS
•
Installation requires appropriate tools and
safety
equipm
ent. Professional installation
is
recommended.
•
This product is water-resistant.
Do not submerge or subject to
high-pressure water spray.
•
Before installation, turn off the audio
system and disconnect the battery
system from the audio system.
•
When possible, install in a dry, well-ventilated
location that does not interfere with factory-
installed systems.
If a dry environment
is not available, a location that is not
exposed to heavy splashing may be used.
•
Do not install in the engine compartment,
any areas of extreme heat or where it will
be directly exposed lo the elements.
•
Before cutting or drilling, check for potential
obstacles behind mounting surfaces.
•
Carefully route all system wiring away moving
parts and sharp edges; secure with cable ties
or wire clamps and use grommets and loom
where appropriate to protect from sharp edges.
SAFETY CONSIDERATIONS
•
Only use this product with 12 volt, negative-
ground electrical
systems.
This product is
not certified or approved for use in aircraft.
•
Mount this product securely to prevent
damage or injury in severe
conditions.
•
An appropriate fuse (or circuit breaker) at
the main power wire is vital for
vehicle/vessel
safety and must be installed within 18 inches
( 45 cm) of the positive battery connection.
•
For ABYC and NMEA applications,
circuit protection is required within 7
inches (18 cm) of the battery, unless the
cable is in an enclosure or conduit.
•
Listen to your audio system at
levels appropriate for operating
conditions and hearing safety.
I
3
Advertisement
