Volume; Pan; Velocity Sensitivity - Yamaha SY-35 Reference Manual

ELEMENT TONE
ET>VOLUME
Level= 0
Summary: Adjusts the volume of the selected ele-
ment.
Settings: 0 ... 99
6
Procedure: Use the [
the lower display line. Use the [–1/NO] and
[+1/YES] keys to select the desired volume level.
ET>PAN
L--|--R
Summary: Determines the position in the stereo
sound field in which the sound from selected
element will be heard (left to right).
Settings: Graphic Display: L--+--R, 5 positions from
left to right.
6
Procedure: Use the [
the lower display line. Use the [–1/NO] and
[+1/YES] keys to select the desired pan position.
ET>VELOCITY ABCD
Sense= 0 ---
Summary: Determines how the output level of the
selected element changes in response to velocity
changes (keyboard initial touch response).
Settings: –5 ... 0 ... +5
6
Procedure: Use the [
the lower display line. Use the [–1/NO] and
[+1/YES] keys to select the desired velocity
sensitivity.
20
ABCD
] key to move the cursor to
ÅBCD
] key to move the cursor to

VELOCITY SENSITIVITY

] key to move the cursor to

VOLUME

Details: A setting of "0" produces no sound while
a setting of "99" produces maximum volume.
The ability to independently adjust the volume
of each element makes it simple to set up the
optimum balance or "mix" between elements.

PAN

Details: The lower line of the display shows a
graphic representation of the stereo sound field
with "L" representing "left" and "R" repre-
senting "right." As you edit the pan parameter
the position indicator will appear at the corre-
sponding position on the graphic display. A
total of five different positions are available,
corresponding to left, left-center, center, right-
center, and right.
Interesting stereo effects can be produced by
placing the output from different elements at
different locations in the stereo sound field.
Details: Plus "+" settings produce higher output
level in response to higher velocity values — i.e.
the harder a key is played, the louder the sound.
Minus "–" settings produce the opposite effect:
lower level in response to higher velocity. A
setting of "0" results in no level variation.
0 No response.
+1 Narrow change between medium-hard and
hard velocity.