Yamaha PortaSound PSS-51 Owner's Manual page 47

3. MIDI
+ Pitch Bend
The actual pitch bend data range is determined by the pitch
bend range setting. If the pitch bend range is set to 12, for
example, data from 00H OOH to 7FH 7FH will be transmitted.
If the pitch bend range is set to 1, data from 3CH ЗАН to 20H
45H will be transmitted.
% Program Change
The VOICE number and the MIDI program number are the
same for the PSS-51. Refer to the VOICE number from the list
on the front panel.
% Control Change
Data Format : BnH — сс — уу
Bnh : Control Event (n=channel number)
жа ec : Control Number
w : Control Value
сс-01Н; modulation (vibrato)
уу= ООН - OFH : 0 (off)
10H - 1FH : 1 (min)
20H - 2FH : 2
ЗОН - ЗЕН : 3
40H - ЗЕН : 4
50H - БЕН : 5
60H - 6FH : 6
70H - ТЕН : 7 (max)
Each voice has its own default value that is used when the
voice is initially selected.
сс=07Н; volume
үу- 7FH : 24 (Panel Value; max)
01H : 01 (-24dB)
00H : 00 (no sound)
The default value when no data is being transmitted is 6F
(panel value; 21)
сс-4ОН; sustain
уу= ООН - ЗЕН : 0 (off)
ж 40H - 7FH : 1 (on)
Default is O (off).
сс-5ВН; reverb
vv= 00H - 1FH : 0 (off)
20H - 3FH : 1
40H - 5FH : 2
60H - 7FH : 3 (max)
Default is 0 (off).
Ш BULK DATA FORMAT
@ HEADER and EOX for Song Memory
11110000 Status = РОН
01000011 Manufacturer ID-43H (Yamaha)
01110110 Classification ID=76H (Portable Keyboad)
00001101 Data Format Number=0DH (PSS-51)
dddddddd -
|
| Song Memory Data (See next раде)
|
dddddddd —
Оссссссс Check Sum Data = Two's compliment of 7
bits sum of all Songs
11110111 EOX = F7H
€ HEADER and EOX for Registration Memory
11110000 Status = FOH
01000011 Manufacturer ID=43H (Yamaha)
01110110 Classification ID=76H (Portable Keyboad)
00001110 Баға Format Number=0EH (PSS-51)
dddddddd
|
| Registration Memory Data
|
dddddddd
Оссссссс Check Sum Data = Two's compliment of 7
bits sum of all Songs
11110111 EOX = F7H
€ Reading the MIDI Implementation Chart
The MIDI Implementation Chart describes the different
functions and conditions for transmit and receive MIDI data.
The FUNCTION column describes the type of MIDI message.
The TRANSMITTED column provides a reference for data
transmission conditions. The RECOGNIZED column outlines
the received data conditions.
HINT: To compare the MIDI Implementation Charts of con-
nected devices, fold the respective charts lengthwise and
match the columns. Refer to the diagrams below.
PSS-51 MIDI
Implementation Chart
The MIDI Implementation
Chart of other device
43