Installing Xg Plug-In Software - Yamaha SW1000XG Owner's Manual

Installing XG Plug-In Software

The following software can be installed by following the steps described below. For information
on each software, see page 7.
• VL Visual Editor
• VH Effect Editor
• DX Easy Editor & DX Simulator
n
Before installing the XG plug-in software, make sure that the XGworks for SW1000XG is installed in the computer.
1.
Insert the supplied CD-ROM in the CD-ROM drive.
2.
Open "My Computer" by double-clicking its icon.
3.
Double-click the CD-ROM icon and then double-click Setup.exe contained in the CD-ROM's
"Plug" folder. Welcome dialog box will appear.
4.
Click [Next]. Software License Agreement dialog box will appear. Read this thoroughly before
moving on to the next step.
19