Table of Contents
Advertisement
Step 5
Type ipconfig/renew and press Enter. You should get an IP address of
192.168.1.x (where x is a number between 2 - 254). Proceed to Section 3, Configure
the Router. If you don't get an IP address, reset the router by holding in the reset
button at the back of the router for 10 seconds while it is ON and try ipconfig/renew
again.
Step 6
For Windows 95/98/ME go to Start, Run, type winipcfg and click OK.
Step 7
Select your network card from the drop-down menu and click Release.
6
Hide quick links:
Advertisement
Table of Contents
