Yamaha S-03SL Owner's Manual page 39

1 After pressing the [MULTI] button, press the
[EDIT] button (the respective LEDs will light). You
are now in the Multi Edit mode.
MODE
MULTI
UTILITY
EDIT
COMPARE
n Before entering the Multi Edit mode, you need to select a
Multi for editing.
2 If the Common Edit display is shown, press the [+]
or [–] button to switch to the Part Edit display.
PART ELEMENT KEY
MUTE
COMMON
3 Use the [+] and [–] buttons to select Parts. Here,
you can select P2 (Part 2) for the piano, P3 (Part 3)
for bass and P10 (Part 10) for drums. First, let's
select P2 (Part 2).
PART ELEMENT KEY
COMMON
VOICE DEMO
MIDI
JOB STORE
Total Vol
127
PAGE PART ELEM KEY
2 E
OCTAVE
Common indicator
Volume
100
PAGE PART ELEM KEY
2 P
OCTAVE
Part indicator
MUTE
4 Use the [▲] and [▼] buttons to switch to the Voice
Selection screen (PAGE 1), then specify the Voice to
be used as the piano Part.
GrandPno
PAGE PART ELEM
1 P 2
OCTAVE
5 Next, use the [▲] and [▼] buttons to switch to the
Volume screen (PAGE 2), then set the volume for
the piano Part as well as its Pan position, Chorus
and Reverb Send levels, if necessary. For details, see
page 56.
Volume
PAGE PART ELEM
2
OCTAVE
6 Continue using the [▲] and [▼] buttons and switch
to the Rcv Ch (MIDI Receive Channel) screen
(PAGE 6). Set the parameter to 2.
Rcv Ch
PAGE PART ELEM
6 P 2
OCTAVE
7 Use the [▲] and [▼] buttons and switch to the
Mono/Poly screen (PAGE 8). Set the parameter to
"poly" (polyphonic).
Mono/Poly
PAGE PART ELEM
8 P 2
OCTAVE
n For Parts that do not require polyphony, the Mode
parameter can be set to "mono" (monophonic).
8 Use the [▲] and [▼] buttons and switch to the Part
Mode screen (PAGE 9). Set the parameter to
"norm" (normal).
Part Mode
PAGE PART ELEM
9 P 2
OCTAVE
n In the case of a Drum Part, set the mode to "drum."
n For details about the Part mode, see page 61.
XG001
KEY
001
KEY
02
KEY
poly
KEY
norm
KEY
39