Yamaha S Rev1 Supplementary Manual page 21

Sampling with a Digital Recorder
Step 2. Recording on Location
At the location the pulses previously recorded on track 1 are played back, while the
responses picked up by the microphones are recorded onto tracks 3, 4, and so on.
Step 3. Sampling into the SREV1
The final step is to sample the recorded responses into the SREV1, using the trigger sig-
nal previously recorded on track 2 to trigger sampling, as shown below.
D/A
Power Amp
Hall
FL
RL
SREV1
Generator Sampler
Digital Multitrack Recorder
Digital Multitrack Recorder
A/D
Mic Amp
Firing pulses
FR
RR
20
PC running
IRSampler
SREV1 Sampling Guide