Data Editing - Yamaha S Rev1 Supplementary Manual

Data Editing

3 Data Editing
If you use your samples as they are, you may experience the following:
• A roaring sound at the end of the reverberation.
• An unwanted delay at the beginning of the reverberation.
• Direct sound in the sample is making it unusable.
• The reverberation is too loud.
These issues are addressed in the following sections, along with an explanation of how
to specify the reverb time and start point that the SREV1 uses to process your
impulse-response data.
11
SREV1 Sampling Guide