Table Of Contents; Unpacking Your Compact Refrigerator; Reversing The Door - Cuisinart CCF-31 Instruction Booklet

CONTENTS
Important Safeguards. . . . . . . . . . . . . . . . . . . .2
Unpacking Your Compact Refrigerator . . . . . .4
Reversing the Door . . . . . . . . . . . . . . . . . . . . .4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Setting Up Your Compact Refrigerator . . . . . .6
Select The Right Location . . . . . . . . . . . . . . .6
Proper Air Circulation. . . . . . . . . . . . . . . . . . .6
Electrical Requirements . . . . . . . . . . . . . . . . .6
Leveling Your Refrigerator . . . . . . . . . . . . . . .7
Using Your Refrigerator . . . . . . . . . . . . . . . . .7
Operating Instructions . . . . . . . . . . . . . . . . . . .8
Temperature Control . . . . . . . . . . . . . . . . . . .8
Helpful Hints for Food Storage . . . . . . . . . . .8
How To Change The Interior Light . . . . . . . . .7
Cleaning And Care . . . . . . . . . . . . . . . . . . . . . .8
Defrosting. . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Power Interruptions . . . . . . . . . . . . . . . . . . . .8
Moving Your Compact Refrigerator . . . . . . . .8
Be Sure the Refrigerator Remains Upright
at All Times . . . . . . . . . . . . . . . . . . . . . . . . . .8
Tips For Saving Energy . . . . . . . . . . . . . . . . . .9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .10
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
UNPACKING YOUR
COMPACT
REFIGERARTOR
Unpack your refrigerator and carefully check
the interior and exterior. Should any damage
be evident, do not plug the appliance in.
Contact the store from which you
purchased it.
This unit must always be kept upright
before, during, and after unpacking.
4

REVERSING THE DOOR

Phillips screwdriver,
Tools required:
flat-bladed screwdriver, adjustable wrench.
Ensure the unit is unplugged and empty.
To take the door off; it is necessary to tilt
the unit backwards. You should rest the unit
on something solid so that it will not slip
during the door reversing process. Save all
parts for the reinstallation of the door.
Do not lay the unit flat as this may
damage the coolant system.
1. Carefully remove
the top hinge
cover with a flat
screwdriver.
2. Unscrew the
top hinge with
a Phillips
screwdriver.
3. Remove the hole
cover with a flat
screwdriver.
4. Move the core
cover from left
side to right side.
And then lift the
upper door and
place it on a
padded surface
to prevent
scratches.
5. Unscrew the
middle hinge
and then lift the
bottom door and
put it on a soft
pad to prevent
scratches.