Distech Controls GS-2CDD02KXECON Series Installation Manual

GS-2CDD02KXECON Series

Product Description

This CO sensor series uses a highly accurate and reliable non-dispersive infrared (NDIR) sensor in an attractive, duct
2
mount enclosure to monitor return air CO
excellent performance characteristics, including high accuracy and low power consumption to ensure stable long term
Operation. The device is also available with an optional resistive temperature sensor.

General Installation Recommendations

Use electrostatic discharge precautions during installation and do not exceed the device ratings.
Read these installation instructions carefully before commissioning the device.

Failure to follow these instructions may result in product damage.

Do not use in an explosive or hazardous environment, with combustible or flammable gases, as safety or emergency

stop devices or in any other application where failure of the product could result in personal injury.
Note: This CO sensor incorporates a Self Calibration feature to correct CO
2
recommended for applications where the CO
the monitored space is occupied 24 hours or consistently maintains higher levels of CO
is recommended.
levels for indoor applications. The compact dual wavelength CO
2
level will be close to normal (400 ppm) at least one hour per day. If
2
I n s t a l l a t i o n G u i d e
sensor drift and is
2
level, the GS-2CDD Series
2
sensor achieves
2