Table of Contents
Advertisement
Available languages
Available languages
EN
DEAR CUSTOMER,
Before you start to use the tool, read this manual
and follow basic safety rules.
PLEASE NOTE! Symbol is used for important
descriptions, information on hazardous conditions,
hazards or safety tips.
The failure to comply with the below warnings, incorrect use and/or
modification of the tool design makes any warranty rights invalid
and releases the manufacturer from any liability for losses resulting
from the tool operation incurred by people, animals, property or the
tool.
Please keep this manual and tips, to refer to them any time. If the
tool is given to another person, hand over also the user manual. We
shall not be held liable for any accidents and damage resulting from
the failure to comply with this manual and safety tips.
RESERVATION: As we improve our products all the time, we reserve
the right to introduce modifications not included in this manual.
SAFETY RULES FOR TORQUE SCREWDRIVER USE:
a) Ensure your workplace is always neat and tidy and well lit.
Insufficient light and mess may cause accidents.
b) A torque screwdriver is a hand-held tool, calibrated by the
manufacturer. For this reason, handle it with appropriate
care.
For this reason, handle it with appropriate care. For
safety reasons, it is prohibited to introduce any unauthorised
changes and/or modifications to the product.
c)
Before every use check if the product is not damaged. If
any damage is detected, do not use the product.
d)
When you use a torque screwdriver, follow the applicable
local safety and accident prevention regulations.
Depending on where and how you use the torque screwdriver,
always use the appropriate protective clothes. Wear protective
goggles during your work.
e)
The torque screwdriver should always be protected from
moisture, dust and dirt, oil and chemicals when working
or during its storage. Do not let the screwdriver fall as it may be
damaged and unfit for use.
f)
The torque screwdriver may not be used for live parts. A
risk of fatal electric shock!
g)
Do not overload the torque screwdriver. Do not exceed the
maximum torque value stipulated in the tool specifications.
h)
Always turn the screwdriver to ensure the load increases
gradually to the required torque value. Do not exert any
force on the screwdriver by hitting or pulling.
i)
Do not use the screwdriver for unscrewing. The torque
screwdriver must not be used for loosening screws, bolts or nuts.
OPERATION MANUAL
TORQUE SCREWDRIVER 66814
Original text translation
j)
Do not use the torque screwdriver for hitting. The
screwdriver may be damaged.
k)
To ensure correct transfer of torque to the screw or bolt,
keep the entire system coaxial. The torque screwdriver should
be positioned perpendicularly to the screw / nut / bolt. Do not tilt it
as this may give a false torque value when tightening.
l)
If you suspect the torque screwdriver is not calibrated
precisely or decalibrated (e.g. following the fall), do not
use it. If you are unsure about the correct use of the tool or if you
have any questions, the response to which is not included in this
manual, contact our technical service.
m)
The torque screwdriver is not a toy and should be kept
away from children. When the product is used in schools,
training centres, hobby workshops and self-help workshops, the
trained personnel, who should also monitor its use, shall be
responsible for it.
THE SET INCLUDES:
Torque screwdriver
ź
Plastic tube (for storage / protection in transport) –1 pc.
ź
Calibration certificate –1 pc.
ź
Operation manual –1 pc.
ź
Warranty card –1 pc.
ź
DESIGNED USE:
The torque screwdriver with appropriate bits 1/4" is designed solely
for tightening screws, bolts, nuts with controlled torque rightwards
and leftwards(see TECHNICAL DETAILS).
No other use than the one described above is permitted as it can
result in product damage and possible hazard for the user.
Every screwdriver is calibrated by the manufacturer and its accuracy
is ±5%. The screwdriver should be checked at least once a year if it is
used with high intensity.
Operation components (see page 2):
n
Fig. A
1.
Fig. B
2.
3.
Fig. C 4. Unit graduation N-m
5.
TECHNICAL DETAILS
MODEL
Holder size
Torque range
Accuracy
Length
Weight
3
–
1 pc.
Bit holder
Locking ring
Turning handle
Decimal graduation
:
66814
1/4"
1-6 Nm
±5%
195 mm
500 g
Advertisement
Table of Contents
