Cd Synchronized Recording - Yamaha CDC-685 Owner's Manual

Using a compatible YAMAHA tape deck, you can synchro-
nize the tape deck to start recording automatically when a
CD starts playing. With this function, you can record a CD
on tape more easily and precisely. (Refer to the tape deck's
operation manual to know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each
other so that both of them can receive the signals from
this unit's remote control transmitter at the same time.
1
U Select a disc.
<1 DISC SK_ _-
PJ Load a tape on the tape deck.
* The peak level searchthg function of this unit is
useful for adjusting recording level on the tape deck.
(Refer to page 21.)
PEAK
Press the SYNCHRO button.
SYNCHRO
This unit enters into the pause mode, and the tape deck
enters into the REC_AUSE mode.
* In this mode, the time display on this unit blinks.
[] If desired, select the track to be recorded first.
[] Press the _ button.
[::>
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
[] If you want to stop recording temporarily and
restart recording from a desired track, follow
steps 3-5 again.
IITo cancel this function
Press the D button.
• ]b finish or stop recording, press the
button on the tape
deck.
• Programmed sequence of tracks can also be recorded with
this thnction, instead of recording an entire disc. (Refer to
pages 12 13 thr the programming procedure.)
• This thnction can also be used together with the tape-
programming function. (ReI_r to pages 17 20.)
E-16