Scanning Discs - Yamaha CDC-685 Owner's Manual

=inTo stop play temporarily
On the front panel
+ib resume play, press the button again (or press the
button).
* The _/_B button on the front panel can also be used to
stop play temporarily or to resume play.
=inTo stop play completely
On the front panel
inTo turn off the power
Press the POWER switch again.
On the front panel
During play, you can open the disc tray by pressing the
PLAYXCHANGE
button on the front panel without
interrupting disc play. Howevez, in this case, pressing the
DISC SKIP buttons has no effect. You can load or replace
discs on the trays when the disc tray is opening, however,
never load a disc on the tray hidden inside the unit. if doing
so, the disc and the unit may be damaged, because the tray
already has a disc, which is being played.
==This mode is convenient to search
for a desired disc (or to check discs
on the disc tray)
When the DISC SCAN button is pressed in stop mode, this
unit will play a section of each disc in turn for 8 seconds.
If, during this play, you find a disc that you want to listen to,
press the DISC SCAN button once again or press the
button to cancel this function. The unit will enter into the
normal play mode.
OISC$Cg+_1
• During this play, the disc tray numbers blink in the display.
Every time the play of a disc is finished, the corresponding
tray number is changed +i'omflashing to lighting+
• If the disc being played has a long blank space between
tracks, you will hear no sound during disc scan.
|
E-9