Makita RM350D Setup Manual page 15

Installing the guide wire
1. Cut the boundary wire loop (eyelet) made in advance at the boundary wire - guide wire connection site.
Fig.14
► 1. Boundary wire
2.
Insert the guide wire to the center port and the boundary wires to the left and right ports of the three connection ports of the supplied coupler.
Fig.15
► 1. Coupler 2. Boundary wire 3. Guide wire
NOTE: Insert all three wires as far as they will go.
3. Clamp the coupler with pliers to fix the wires.
Fig.16
1
1
2
15 ENGLISH
1
2
3