Access Networks; Connect To Wi-Fi Networks; Turn On Airplane Mode; Connect To The Wired Ethernet - Lenovo ThinkPad E14 Gen 6 User Manual

• Select the country or region.
• Connect to an available network.
• Accept the license agreement.
• Create a Microsoft account or log in with your Microsoft account.
• Set up your password, fingerprint, or facial recognition as preferred.
• Customize your experience.
Notes:
• Depending on the model, some settings might not be available on your computer.
• Do not turn off your computer and ensure it is connected to the ac power during the whole process.
Follow the instructions to set up the operating system.
Step 1. Connect the computer to the ac power and turn it on.
Step 2. Follow the on-screen instructions to complete the operating system setup.
Related topics
• "Log in with your fingerprint" on page 31
• "Log in with facial recognition (for selected models)" on page 32
• "Set, change, or remove a password" on page 34

Access networks

This section helps you connect to a wireless or wired network.

Connect to Wi-Fi networks

Click the network icon
required information, if needed.
Note: The wireless LAN module on your computer may support different standards. For some countries or
regions, use of 802.11ax may be disabled according to local regulations.

Turn on Airplane mode

You may need to turn on Airplane mode if you board an airplane. When Airplane mode is on, all wireless
features are turned off automatically. Click the network icon
Airplane mode.
Note: You can enable Wi-Fi networks in this mode according to your actual needs.

Connect to the wired Ethernet

Connect your computer to a local network through the Ethernet connector on your computer with an
Ethernet cable.
10
ThinkPad E14 Gen 6 and ThinkPad E16 Gen 2 User Guide
on the bottom right of your display to connect to an available network. Provide
on the bottom right of your display to turn on