Table of Contents
Advertisement
The two support legs, marked B, shall be inserted into the corresponding holes marked with the same designation and pressed down
gently until the spring-loaded buttons emerge from the holes provided for them.
There are four (4) levels of height adjustment of the support legs with wheels. The height is adjusted by selecting the hole in which to
fix the support legs as shown in Figure 2.
NOTE: The support legs with wheels should be mounted in front of the tub - the side with the digital thermometer.
To secure the changing pad, press the button located on the left support frame of the stand (Figure 2).
3.Step 3 – Figure 3: Accessory basket installation: Insert the two side metal tubes into the pockets on the sides of the accessory basket
and connect them to the bottom support, observing the direction of the arrows and the correspondence with the letters A,B. Fix on all
sides using M5*40 screw.
4.Step 4 – Figure 4: Installation of the water drain pipe: The assembled bathtub with stand is placed in an upright position. One end of
the water drain pipe is inserted into the opening on the back of the folding bath tub; the other end of the pipe is fixed into the top of
the support leg at the front of the tub - the side with the digital thermometer.
INSTRUCTIONS FOR USE
USING A FOLDING BATH TUB - FIGURE B:
1.Press the bottom of the folding bath tub to open it (figure b.1).
2. Press the indicated with arrow location in the figure b.2 to release the shower head handle.
3.Always lock the support legs with wheels before using the bath tub (figure b.3). To lock the wheels: lift up on the wheels lock levers.
To unlock the wheels: lower down the wheel lock levers.
4.Always lock the wheels before using the bath tub (figure b.4).
5.To turn on the digital thermometer, touch the thermometer screen with your hand and in about 10 seconds the screen will begin to
light (figure b.5).
USING A DIGITAL THERMOMETER - FIGURE D:
When the degrees on the thermometer indicator are colored blue: the water temperature is too cold.
When the thermometer indicator degrees are colored green: the water temperature is suitable for bathing the child.
When the thermometer indicator degrees are colored red: the water temperature is too hot.
USE OF A CHANGING PAD- FIGURE C:
1. Always lock the support legs before using the changing pad (figure c.1).
2.Unlock and raise the entire structure to a comfortable height (figure c.2).
3.Fold the accessory compartment as shown in figure c.3.
4.Raise the changing pad (figure c.4).
5. Fix the caller to the base (figure c.5 and figure.6).
7.Tighten the seat belts after placing the child on the changing pad (figure c.7).
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
• After each use, wash with soap and water, rinse and dry. Do not use bleach, aggressive detergents, or abrasive products to clean the
product.
•Store in a dry and clean place.
• Do not expose to the direct impact of the environment - sun, rain, humidity or sudden temperature changes.
•Check regularly the product before and after each usage for malfunctions, cracks, broken or missing parts. Stop using it if you find any
damage until its removal. Contact the shop, from which you bought the product or with importer!
THE PRODUCT IS MANUFACTURED IN ACCORDANCE WITH: EN 17072:2018; EN 1222-1:2008+A1:2013; EN IEC
62115:2020+A11:2020.
Produced for CANGAROO
Produced by Moni Trade LTD
Address: Bulgaria, city of Sofia, Trebich quarter, 1 Dolo str.
Tel: +359 2/ 936 07 90; Web: www.moni.bg
15
Advertisement
Table of Contents
