Editing The Pf Native Part Parameters (Xg Plug-In System) - Yamaha PLG150-PF Owner's Manual

Editing the PF Native Part Parameters
(XG Plug-in System)
Any of the PF voices can be freely edited from the front panel with the PF Part parameters. These
same parameters can also be edited from a computer using the PF Easy Editor software (in
XGworks).
Keep in mind that changing the Part parameters does not permanently affect the original voice set-
tings. The edits that you make here temporarily change the settings of the currently selected voice.
When you select a different voice for the Part, the settings are applied to the newly selected voice.
The Part parameter settings cannot be saved in Multi Play mode. If you wish to save your Part parameter
edits, do it from the Performance mode or the PF Easy Editor.
The example displays used in the following explanations are all taken from the MU128.
1
Select the Part having the PF voice, then select the desired voice.
Select the appropriate Part with the PART -/+ buttons, then, with the cursor at the Voice Number
parameter, select the desired voice.
2
Press the EDIT button to enter the Edit mode.
3
Select the "PLUGIN" menu.
Use the SELECT > button, then press the ENTER button. The PLG150-PF Edit menu appears.
4
Select the desired parameter.
Use the [SELECT </>] buttons.
5
Adjust the value or change the setting for the selected parameter.
Use the [VALUE +/-] buttons.
6
Return to the main Play display.
Press the [EXIT] button several times, or press the [PLAY] button once.
17