Tormach AF50+ Operator's Manual
  1. Manuals
  2. Brands
  3. Tormach Manuals
  4. Saw
  5. AF50+
  6. Operator's manual

Tormach AF50+ Operator's Manual

Autofeed bandsaw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Original Instructions
OPERATOR'S MANUAL
Version 0324A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AF50+ and is the answer not in the manual?

Questions and answers

Related Manuals for Tormach AF50+

Summary of Contents for Tormach AF50+

  • Page 1 Original Instructions OPERATOR'S MANUAL Version 0324A...
  • Page 2 Copyright Notice Information is subject to change without notice by Tormach, Inc. For the most recent version of this document, see tormach.com/support. You're welcome to make copies of this document for evaluating, learning about, and/or using the machine. You may not charge for any copies you make beyond the cost of printing.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SAFETY 1.1 Safety Overview 1.1.1 Safety Messages Personal Injury Property Damage 1.2 Machine Safety 1.2.1 General Shop Safety 1.2.2 Operational Safety General Blades Workholding 1.2.3 Electrical Safety ABOUT YOUR MACHINE 2.1 Machine Specifications SITE REQUIREMENTS 3.1 General Site and Space Requirements 3.1.1 Site Requirements 3.1.2 Space Requirements 3.2 Electrical and Power Requirements...
  • Page 4 10.1.5 Material Doesn't Advance 10.1.6 Material Slips in Vise Clamps 10.1.7 Noise or Problems Moving Through the Cut ©Tormach® 2024 Page 4 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 5 11.22 Lift Cylinder Assembly Parts List 11.23 Coolant System Exploded View 11.24 Coolant System Parts List PNEUMATIC SCHEMATICS ©Tormach® 2024 Page 5 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 6 TABLE OF CONTENTS 12.1 Pneumatic System 12.2 Pneumatic System Parts List ELECTRICAL SCHEMATICS 13.1 Electrical Schematic ©Tormach® 2024 Page 6 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 7 All information provided is on an as is basis. The authors, publisher, and Tormach, Inc. ("we", "us", and so on) PURPOSE AND SCOPE shall not have any liability for, or responsibility to, any person...

  • Page 9: Safety

    SAFETY IN THIS SECTION, YOU'LL LEARN: About the standards and safety precautions associated with this machine. Before operating the machine in any way, you must read and understand this section. Safe operation of the machine depends on its proper use and the precautions you take. Only trained personnel —...

  • Page 10: Safety Overview

    Become familiar with all physical controls. Always use a chip scraper or brush when clearing away chips, oil, or coolant. ©Tormach® 2024 Page 10 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 11: Blades

    Fiberglass powered off and all power is removed from the system. G10 fiberglass laminate ©Tormach® 2024 Page 11 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...
  • Page 12 Never reach into the electrical cabinet with the machine powered on. Never modify the machine's electronics. Never drill into the electrical cabinet. ©Tormach® 2024 Page 12 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 13: About Your Machine

    ABOUT YOUR MACHINE IN THIS SECTION, YOU'LL LEARN: About this machine's specifications. CONTENTS 2.1 Machine Specifications...

  • Page 14: Machine Specifications

    36 in. (0.91 m) plus the length of stock Minimum Height 67 in. (1.71 m) Minimum Width 60 in. (1.53 m) ©Tormach® 2024 Page 14 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 15: Site Requirements

    SITE REQUIREMENTS IN THIS SECTION, YOU'LL LEARN: About the site requirements of this machine (including electrical and power requirements). Before operating the machine in any way, you must read and understand this section. CONTENTS 3.1 General Site and Space Requirements 3.2 Electrical and Power Requirements 3.3 Air Requirements...

  • Page 16: General Site And Space Requirements

    Figure 3-1: Dimensions of the machine itself, as viewed from the front. receptacle. Typical System Footprint 83" × 57" ( 2.1 m × 1.4 m) ©Tormach® 2024 Page 16 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 17: Air Requirements

    Lubricated Air You must lubricate the air with air tool oil. ©Tormach® 2024 Page 17 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 19: Installation

    INSTALLATION IN THIS SECTION, YOU'LL LEARN: About the installation process required for this machine. Before operating the machine in any way, you must read and understand this section. CONTENTS 4.1 Before You Begin 4.2 Move the Crate 4.3 Unpack the Crate 4.4 Set Up the Machine 4.5 Verify the Installation...

  • Page 20: Before You Begin

    If there is any damage or shortages, you must contact shipping crate, you must put on work gloves and Tormach within 30 days of receipt. Create a support safety eyewear that meets ANSI Z87+. If you don't, ticket with Tormach Technical Support at the shipping crate and steel straps could cut you, tormach.com/how-to-submit-a-support-ticket for...
  • Page 21 Verify the received goods against the packing list. If there is any damage or shortages, you must contact Tormach within 30 days of receipt. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.

  • Page 22: Set Up The Machine

    Make note of any high or low spots, and, if required, adjust the leveling feet. ©Tormach® 2024 Page 22 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 23: Install The Blade Tensioner Handles

    2. Install the three blade tensioner handles with a flat- blade screwdriver. Figure 4-12: Loosening the two screws for the outfeed guide. ©Tormach® 2024 Page 23 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 24: Remove The Shipping Bolts On The Rear Cage

    2. Open the pulley cover. Figure 4-17: Original air fitting installed on the FRL. ©Tormach® 2024 Page 24 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 25: Air Requirements

    Now, you must verify that you can power off the machine. Go to "Power Off the Machine" (on the next page). ©Tormach® 2024 Page 25 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 26: Power Off The Machine

    You're done verifying that you can power off the machine. You've successfully verified the installation of your machine. ©Tormach® 2024 Page 26 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 27: System Basics

    SYSTEM BASICS IN THIS SECTION, YOU'LL LEARN: About the main components of the machine and how it moves. Before operating the machine in any way, you must read and understand this section. CONTENTS 5.1 Controls Overview...

  • Page 28: Controls Overview

    Stroke Button On the control panel. For information, see "Set the Number of Cycles" (page 35). ©Tormach® 2024 Page 28 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 29: Basic Operations

    BASIC OPERATIONS IN THIS SECTION, YOU'LL LEARN: About the basic operations required for most projects, organized as a suggested project workflow. CONTENTS 6.1 Choose a Blade 6.2 Change a Blade 6.3 Change the Speed 6.4 Change the Feed Rate 6.5 Change the Clamping Pressure 6.6 Set the Number of Cuts 6.7 Set the Number of Cycles...

  • Page 30: Choose A Blade

    6.2.1 Install a New Blade 6.2.2 Verify the Blade Installation 6.2.3 Break in the Blade ©Tormach® 2024 Page 30 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 31 8 mm hex wrench until the door can open. Make sure the bolt is still secure enough to hold the air ©Tormach® 2024 Page 31 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...
  • Page 32 Figure 6-9: Tensioner on top of the saw head. Note: Only use the inner circle on the tensioner for 3/4" blades. ©Tormach® 2024 Page 32 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 33: Verify The Blade Installation

    21. Re-install the air cylinder and the air line. 22. Carefully set the saw head down. ©Tormach® 2024 Page 33 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 34: Change The Speed

    3. Close the hydraulic flow on the blade feed lever: turn the lever so that it's perpendicular with the cylinder. ©Tormach® 2024 Page 34 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 35: Change The Clamping Pressure

    Note: You'll only set the number of cycles in automatic mode. The Stroke button isn't used in manual mode. ©Tormach® 2024 Page 35 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 37: Automatic Operation

    AUTOMATIC OPERATION IN THIS SECTION, YOU'LL LEARN: How to operate the machine in automatic mode. CONTENTS 7.1 Use Automatic Mode...

  • Page 38: Use Automatic Mode

    11. Adjust the clamping pressure to the desired amount using the regulator (mounted by the gearbox). ©Tormach® 2024 Page 38 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 39 Then, lower it until it meets the lift height sensor as shown in the following image. ©Tormach® 2024 Page 39 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 41: Manual Operation

    MANUAL OPERATION IN THIS SECTION, YOU'LL LEARN: How to operate the machine in manual mode. CONTENTS 8.1 Use Manual Mode...

  • Page 42: Use Manual Mode

    A display of - - - on the control panel indicates that the machine is in manual mode. ©Tormach® 2024 Page 42 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 43 Use the feed adjustment knob to set the cutting rate. ©Tormach® 2024 Page 43 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 45: Machine Maintenance

    MACHINE MAINTENANCE IN THIS SECTION, YOU'LL LEARN: About the required maintenance procedures that you must do so that this machine operates as designed. Before operating the machine in any way, you must read and understand this section. CONTENTS 9.1 Machine Safety 9.2 Maintenance Schedules 9.3 Replace the Gearbox Oil...

  • Page 46: Machine Safety

    Lightly lubricate the vise lead screw with #2 tube grease. (page 77). For any additional support, we can help. Create a 9.2.5 Annually support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on Inspect the gearbox for leaks. how to proceed.
  • Page 47 7. Replace the cover plate and gasket, and secure them in place with the bolts that you set aside in Step 3. ©Tormach® 2024 Page 47 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 49: Troubleshooting

    TROUBLESHOOTING IN THIS SECTION, YOU'LL LEARN: About common causes of failure in this machine, and our recommendations for diagnosing and correcting them. WARNING! Electrocution Hazard - Electrical Cabinet: Do not make or disconnect connections under power. Before operating the machine in any way, you must read and understand this section. CONTENTS 10.1 Operations Troubleshooting 10.2 Motor and Electrical Troubleshooting...

  • Page 50: Operations Troubleshooting

    10.1.5 Material Doesn't Advance 10.1.6 Material Slips in Vise Clamps 10.1.7 Noise or Problems Moving Through the Cut ©Tormach® 2024 Page 50 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 51: Blades Break Too Frequently

    Adjustments. rub on the wheel operations. Follow the procedure to adjust the blade flange. tracking. ©Tormach® 2024 Page 51 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...
  • Page 52 Examine the behavior of the machine as it cuts. ©Tormach® 2024 Page 52 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 53: Blades Dull Too Quickly

    If Adjustments" (page 67). blade on the necessary, adjust the tracking. wheels. ©Tormach® 2024 Page 53 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 54: Blades Lose Teeth

    Examine the behavior of the machine as it cuts. ©Tormach® 2024 Page 54 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 55: Cuts Are Crooked

    If necessary, use the tensioner on Blade" (page 30). the top of the saw head to adjust the blade's tension. ©Tormach® 2024 Page 55 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 56: Material Doesn't Advance

    Examine the infeed table for correct alignment. If it's For information, see "Mechanical infeed table. not correctly aligned, adjust it. Adjustments" (page 67). ©Tormach® 2024 Page 56 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 57: Material Slips In Vise Clamps

    During manual operation, verify that the handwheel is For information, see "Manual handwheel. completely tightened. If it's not, tighten it. Operation" (page 41). ©Tormach® 2024 Page 57 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 58: Noise Or Problems Moving Through The Cut

    Examine the Speed" (page 34). behavior of the machine as it cuts. ©Tormach® 2024 Page 58 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 59: Motor And Electrical Troubleshooting

    10.2.3 Machine Doesn't Start or a Panel Breaker Trips 10.2.4 Machine Stalls or It's Underpowered 10.2.5 Noise or Machine Vibration ©Tormach® 2024 Page 59 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 60: Coolant Pump Doesn't Work

    Examine the main fuse. If necessary, replace it. For information, see "Electrical main fuse. Schematics" (page 111). ©Tormach® 2024 Page 60 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 61 For information, see "Electrical wiring. disconnection, or corrosion. If necessary, replace or Schematics" (page 111). repair the wires. ©Tormach® 2024 Page 61 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 62: Error On The Control Panel

    Saw lift proximity sensors (up and down) are both active. Infeed and outfeed proximity sensors (forward and rear) are both active. ©Tormach® 2024 Page 62 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 63 ×2 LED: Outfeed (retract) proximity sensor ×4 LED: Saw down proximity sensor ×5 LED: Saw up proximity sensor ©Tormach® 2024 Page 63 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 64: Machine Doesn't Start Or A Panel Breaker Trips

    Create a support ticket with motor. Tormach Technical Support at tormach.com/how-to-submit-a- support-ticket for guidance on how to proceed. ©Tormach® 2024 Page 64 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 65: Machine Stalls Or It's Underpowered

    Test the contacts. If necessary, make the correct For information, see "Electrical plug/receptacle. connections. Schematics" (page 111). ©Tormach® 2024 Page 65 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...
  • Page 66 Create a support ticket with motor. Tormach Technical Support at tormach.com/how-to-submit-a- support-ticket for guidance on how to proceed. ©Tormach® 2024 Page 66 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 67: Noise Or Machine Vibration

    Push the Emergency Stop button on the operator panel to lock it into the disabled position. b. Turn the Main Disconnect switch to OFF. ©Tormach® 2024 Page 67 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 68: Adjust The Blade Tracking

    3. On the back of the machine, identify the air cylinder, as shown in the following image. Figure 10-2: Air cylinder on the back of the machine. ©Tormach® 2024 Page 68 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 69 6. Lift the saw head to the upright position, as shown in the following image. Figure 10-4: Bandsaw head lifted upright. ©Tormach® 2024 Page 69 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...
  • Page 70 9. Remove the two screws from the side of the blade cover with a 5 mm hex wrench, and then set aside the screws. Figure 10-7: Removing the screws securing the blade cover to the bandsaw. ©Tormach® 2024 Page 70 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 71 Turn the Main Disconnect switch to ON. Mains power is connected to the machine. ©Tormach® 2024 Page 71 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 72: Adjust The Blade Brush

    NOTICE! You must verify that the blade brush is adjusted correctly and regularly maintained. If you don't, it could cause damage to the blade. For information, see "Machine Maintenance" (page 45). To adjust the blade brush: ©Tormach® 2024 Page 72 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 73: Adjust The Height Of The Infeed Table

    4. Open the clamps on both vises with the handwheel and the clamp handle. Then, load the stock between the vises as shown in the following image. Figure 10-13: Stock loaded between the vises. ©Tormach® 2024 Page 73 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 74: Adjust The Jaws

    4. Loosen the two screws securing the fixed jaw to the base casting with a box end wrench. ©Tormach® 2024 Page 74 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 75: Adjust The Fixed Clamp Jaw

    3. Close the vise with the handwheel until the material is secure. Verify that the stock is flat against the entire length of the base casting. ©Tormach® 2024 Page 75 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...
  • Page 76 8. Remove the clamp from the machine. 9. Remove the stock from the machine. ©Tormach® 2024 Page 76 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 77: Diagrams And Parts Lists

    DIAGRAMS AND PARTS LISTS IN THIS SECTION, YOU'LL LEARN: About this machine’s components. NOTICE! Only use Tormach-approved parts when making replacements. If you don't replace parts with those listed in this section, you may void your warranty. CONTENTS 11.1 Base Casting Exploded View 11.2 Base Casting Parts List...
  • Page 78 11: DIAGRAMS AND PARTS LISTS 11.24 Coolant System Parts List ©Tormach® 2024 Page 78 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 79: Base Casting Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.1 BASE CASTING EXPLODED VIEW ©Tormach® 2024 Page 79 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 80: Base Casting Parts List

    Clamp Vise Washer Clamp Vise T-Nut Screw, Hex Head, 1/2" × 12 - 2" Nut, 1/2" 12 ©Tormach® 2024 Page 80 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 81 Screw, Round Head, 1/4" × 20 - 1/2" Proximity Switch Cover Proximity Sensor Switch (PN 52682) Fitting Silencer ©Tormach® 2024 Page 81 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 82: Head Casting Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.3 HEAD CASTING EXPLODED VIEW ©Tormach® 2024 Page 82 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 83: Head Casting Parts List

    Gear Box Assembly (PN 52650) Limit Switch (PN 52651) Washer, 3/8" 16 × 3T Brush (PN 52652) Brush Holder (PN 52653) ©Tormach® 2024 Page 83 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...
  • Page 84 Screw, Round Head, 1/4" × 20 - 1/2" Control Panel (PN 52657) Emergency Stop Switch Blade Guide Knob ©Tormach® 2024 Page 84 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 85: Infeed Table Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.5 INFEED TABLE EXPLODED VIEW ©Tormach® 2024 Page 85 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 86: Infeed Table Parts List

    Screw, Socket Head Hex, M5 × 35 Screw, Round Head, 1/4" × 20 - 1/2" ©Tormach® 2024 Page 86 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 87 Roller Bracket Washer, 1/4'' 16 × 1.5T Screw, Hex Head Socket, 5/16" × 18 - 1" ©Tormach® 2024 Page 87 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 88: Stand Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.7 STAND EXPLODED VIEW ©Tormach® 2024 Page 88 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 89: Stand Parts List

    Screw, Round Head, 1/4" × 20 - 1" Air Fixed Board Electrical Cabinet Electrical Cabinet Cover ©Tormach® 2024 Page 89 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 90: Blade Wheel Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.9 BLADE WHEEL EXPLODED VIEW ©Tormach® 2024 Page 90 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 91: Blade Wheel Parts List

    Bearing (PN 52659) Spacer Ring Idler Wheel Drive Wheel Screw, Set, 1/4" × 20 - 1/2" ©Tormach® 2024 Page 91 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 92: Motor Assembly Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.11 MOTOR ASSEMBLY EXPLODED VIEW ©Tormach® 2024 Page 92 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 93: Motor Assembly Parts List

    Screw, Truss Head, 5/16" × 18 - 1" Screw, Round Head, 1/4" × 20 - 1/2" Washer, 1/4" 16 × 1.5T ©Tormach® 2024 Page 93 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 94: Gear Box Assembly Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.13 GEAR BOX ASSEMBLY EXPLODED VIEW ©Tormach® 2024 Page 94 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 95: Gear Box Assembly Parts List

    Key, Flat, 6 × 6 - 20 Retaining Ring Spacer Ring Bearing Spacer Ring Worm Gear ©Tormach® 2024 Page 95 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 96: Sliding Blade Guide (Parent) Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.15 SLIDING BLADE GUIDE (PARENT) EXPLODED VIEW ©Tormach® 2024 Page 96 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 97: Sliding Blade Guide (Parent) Parts List

    Nut, 3/8" - 24 Washer, Spring, 3/8" Sliding Blade Guide (PN 52665) Shaft (PN 52666) Blade Cover ©Tormach® 2024 Page 97 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 98: Sliding Blade Guard (Child) Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.17 SLIDING BLADE GUARD (CHILD) EXPLODED VIEW ©Tormach® 2024 Page 98 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 99: Sliding Blade Guide (Parent) Parts List

    Washer, Spring, 3/8" Washer, Spring, 5/16" Screw, Round Head, 5/16" × 18 - 1-1/4" Shaft ©Tormach® 2024 Page 99 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 100: Blade Tensioning Kit Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.19 BLADE TENSIONING KIT EXPLODED VIEW ©Tormach® 2024 Page 100 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 101: Blade Tensioning Kit Parts List

    Spring, Compressed Spacer Ring, 30 × 15L Tension Gage (PN 52673) Tension Handle Hub Handle Spacer ©Tormach® 2024 Page 101 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 102: Lift Cylinder Assembly Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.21 LIFT CYLINDER ASSEMBLY EXPLODED VIEW ©Tormach® 2024 Page 102 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 103: Lift Cylinder Assembly Parts List

    Screw, Socket Head Hex, 1/4" × 20 - 3/4" Top Pivot Mount Lift Cylinder Stop Proximity Sensor Pull Ring Protective Cover ©Tormach® 2024 Page 103 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 104: Coolant System Exploded View

    11: DIAGRAMS AND PARTS LISTS 11.23 COOLANT SYSTEM EXPLODED VIEW ©Tormach® 2024 Page 104 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 105: Coolant System Parts List

    Pneumatic Fitting Nozzle Blade Cover Nut, 5/16" - 18 PVC Hose, 5/8" × 260 (PN 52694) ©Tormach® 2024 Page 105 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...

  • Page 107: Pneumatic Schematics

    PNEUMATIC SCHEMATICS IN THIS SECTION, YOU'LL LEARN: About the pneumatic schematics for this machine's pneumatic systems. CONTENTS 12.1 Pneumatic System 12.2 Pneumatic System Parts List...
  • Page 108 12: PNEUMATIC SCHEMATICS 12.1 PNEUMATIC SYSTEM ©Tormach® 2024 Page 108 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 109 Pressure Gauge Fitting Regulator Fitting Fitting Fitting Solenoid Valve Silencer Manifold Fitting Manifold Lifting Cylinder ©Tormach® 2024 Page 109 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version Specifications subject to change without notice. 0324A) For the most recent version, see tormach.com/support...
  • Page 111 ELECTRICAL SCHEMATICS IN THIS SECTION, YOU'LL LEARN: About the electrical schematics for this machine’s electronics. CONTENTS 13.1 Electrical Schematic...
  • Page 112 13: ELECTRICAL SCHEMATICS 13.1 ELECTRICAL SCHEMATIC ©Tormach® 2024 Page 112 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

Table of Contents