Tormach Autofeed Bandsaw AF50 Operator's Manual
  1. Manuals
  2. Brands
  3. Tormach Manuals
  4. Saw
  5. Autofeed Bandsaw AF50
  6. Operator's manual

Tormach Autofeed Bandsaw AF50 Operator's Manual

Hide thumbs Also See for Autofeed Bandsaw AF50:
Table of Contents

Advertisement

Quick Links

Download this manual
Original Instructions
OPERATOR'S MANUAL
Version 0320A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Autofeed Bandsaw AF50 and is the answer not in the manual?

Questions and answers

Related Manuals for Tormach Autofeed Bandsaw AF50

Summary of Contents for Tormach Autofeed Bandsaw AF50

  • Page 1 Original Instructions OPERATOR'S MANUAL Version 0320A...
  • Page 2 Copyright Notice Information is subject to change without notice by Tormach, Inc. For the most recent version of this document, see tormach.com/support. You're welcome to make copies of this document for evaluating, learning about, and/or using the machine. You may not charge for any copies you make beyond the cost of printing.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SAFETY 1.1 Safety Overview 1.1.1 Safety Messages Personal Injury Property Damage 1.2 Machine Safety 1.2.1 General Shop Safety 1.2.2 Operational Safety General Blades Workholding 1.2.3 Electrical Safety ABOUT YOUR MACHINE 2.1 Specifications Reference SITE REQUIREMENTS 3.1 General Site and Space Requirements 3.1.1 Site Requirements 3.1.2 Space Requirements 3.2 Electrical and Power Requirements...
  • Page 4 10.2 Adjust the Blade Tracking 10.3 Adjust the Blade Brush 10.4 Adjust the Height of the Infeed Table ©Tormach® 2020 Page 4 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 5 ELECTRICAL SCHEMATICS 14.1 115 Vac Power 14.2 Controls and Sensors 14.3 Terminal Strips 14.4 Electrical Panel Layout ©Tormach® 2020 Page 5 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 6 TABLE OF CONTENTS 14.5 Electrical Panel Parts List ©Tormach® 2020 Page 6 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 7 PURPOSE AND SCOPE implied. All information provided is on an as is basis. The authors, publisher, and Tormach, Inc. ("we", "us", and so on) This document is intended to provide sufficient information to shall not have any liability for, or responsibility to, any person allow you to install, configure, and use your machine.

  • Page 9: Safety

    SAFETY IN THIS SECTION, YOU'LL LEARN: About the standards and safety precautions associated with this machine. Before operating the machine in any way, you must read and understand this section. Safe operation of the machine depends on its proper use and the precautions you take. Only trained personnel —...

  • Page 10: Safety Overview

    Become familiar with all physical controls. Always use a chip scraper or brush when clearing away chips, oil, or coolant. ©Tormach® 2020 Page 10 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 11: Blades

    For more information, see "Electrical and Power Never allow swarf to accumulate on or within the Requirements" (page 18). machine. ©Tormach® 2020 Page 11 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 12 Never reach into the electrical cabinet with the machine powered on. Never modify the machine's electronics. Never drill into the electrical cabinet. ©Tormach® 2020 Page 12 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 13: About Your Machine

    ABOUT YOUR MACHINE IN THIS SECTION, YOU'LL LEARN: About this machine's specifications. CONTENTS 2.1 Specifications Reference...

  • Page 14: Specifications Reference

    15 A Compressed Air Source 90 psi to 120 psi (620 kPa to 827 kPa) Space Requirements ©Tormach® 2020 Page 14 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 15 36 in. (0.91 m) plus the length of stock Minimum Height 67 in. (1.71 m) Minimum Width 60 in. (1.53 m) ©Tormach® 2020 Page 15 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 17: Site Requirements

    SITE REQUIREMENTS IN THIS SECTION, YOU'LL LEARN: About the site requirements of this machine (including electrical and power requirements). Before operating the machine in any way, you must read and understand this section. CONTENTS 3.1 General Site and Space Requirements 3.2 Electrical and Power Requirements 3.3 Air Requirements...

  • Page 18: General Site And Space Requirements

    3.2 ELECTRICAL AND POWER REQUIREMENTS You must verify that the site conforms to the following electrical and power requirements. ©Tormach® 2020 Page 18 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 19: Installation

    INSTALLATION IN THIS SECTION, YOU'LL LEARN: About the installation process required for this machine. Before operating the machine in any way, you must read and understand this section. CONTENTS 4.1 Before You Begin 4.2 Move the Crate 4.3 Unpack the Crate 4.4 Set Up the Machine 4.5 Verify the Installation...

  • Page 20: Before You Begin

    Verify the received goods against the packing list. If there is any damage or shortages, you must contact 1. Put on work gloves and eye protection. Tormach within 30 days of receipt. Email 2. Open and disassemble the machine's shipping crate with support@tormach.com to contact Tormach Technical snips and a pry bar.

  • Page 21: Set Up The Machine

    Figure 4-4: Coolant screen put on the machine's base. Figure 4-2: Leveling feet on the machine. ©Tormach® 2020 Page 21 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 22: Install The Blade Tensioner Handles

    Connect the air line from your site to the input port on the FRL Filter-Regulator-Lubricator (on the back of the machine). ©Tormach® 2020 Page 22 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 23: Air Requirements

    If it's not, go to "Align the Fixed Jaw" (page 47). ©Tormach® 2020 Page 23 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 24: Verify The Installation

    2. Inspect each proximity sensor to verify that there's a 0.55 mm to 0.75 mm gap. ©Tormach® 2020 Page 24 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 25: System Basics

    SYSTEM BASICS IN THIS SECTION, YOU'LL LEARN: About the main components of the machine and how it moves. Before operating the machine in any way, you must read and understand this section. CONTENTS 5.1 Controls Overview...

  • Page 26: Controls Overview

    (page 32). Stroke Button On the control panel. For information, see "Set the Number of Cycles" (page 32). ©Tormach® 2020 Page 26 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 27: Basic Operations

    BASIC OPERATIONS IN THIS SECTION, YOU'LL LEARN: About the basic operations required for most projects, organized as a suggested project workflow. CONTENTS 6.1 Choose a Blade 6.2 Change a Blade 6.3 Change the Speed 6.4 Change the Feed Rate 6.5 Change the Clamping Pressure 6.6 Set the Number of Cuts 6.7 Set the Number of Cycles...

  • Page 28: Choose A Blade

    6.2.2 Verify the Blade Installation Figure 6-2: Quick-release pin on the air cylinder. 6.2.3 Break in the Blade ©Tormach® 2020 Page 28 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 29 Figure 6-8: Tensioner on top of the saw head. ©Tormach® 2020 Page 29 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 30: Verify The Blade Installation

    Your blade will cut more consistently and last ©Tormach® 2020 Page 30 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 31: Change The Speed

    60 Hz: 135, 161, 226, 394 ft/min (41, 49, 69, 120 m/min) Figure 6-11: Blade feed lever. ©Tormach® 2020 Page 31 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 32: Change The Clamping Pressure

    The control board displays ---. Push the Down Arrow button until the control board displays ---. ©Tormach® 2020 Page 32 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 33: Automatic Operation

    AUTOMATIC OPERATION IN THIS SECTION, YOU'LL LEARN: How to operate the machine in automatic mode. CONTENTS 7.1 Use Automatic Mode...

  • Page 34: Use Automatic Mode

    12. Adjust the clamping pressure to the desired amount using the regulator (mounted by the gearbox). ©Tormach® 2020 Page 34 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 35 Then, lower it until it meets the lift height sensor as shown in the following image. ©Tormach® 2020 Page 35 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 37: Manual Operation

    MANUAL OPERATION IN THIS SECTION, YOU'LL LEARN: How to operate the machine in manual mode. CONTENTS 8.1 Use Manual Mode...

  • Page 38: Use Manual Mode

    9. Position the coolant nozzle so that it points at the blade Figure 8-3: Blade feed lever. ahead of the material. ©Tormach® 2020 Page 38 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 39 14. On the front of the machine, above the blade feed lever, locate the feed adjustment knob. Use the feed adjustment knob to set the cutting rate. ©Tormach® 2020 Page 39 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 41: Machine Maintenance

    MACHINE MAINTENANCE IN THIS SECTION, YOU'LL LEARN: About the required maintenance procedures that you must do so that this machine operates as designed. Before operating the machine in any way, you must read and understand this section. CONTENTS 9.1 Machine Safety 9.2 Maintenance Schedules 9.3 Replace the Gearbox Oil...

  • Page 42: Machine Safety

    Clean all exterior surfaces with a mild cleaner. Examine the blade brush and adjust it if it's not in contact with the blade. ©Tormach® 2020 Page 42 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 43: Mechanical Adjustments

    MECHANICAL ADJUSTMENTS IN THIS SECTION, YOU'LL LEARN: About adjustments that may be required to operate your machine as expected. Before operating the machine in any way, you must read and understand this section. CONTENTS 10.1 Adjust the Blade Guides 10.2 Adjust the Blade Tracking 10.3 Adjust the Blade Brush 10.4 Adjust the Height of the Infeed Table 10.5 Adjust the Jaws...

  • Page 44: Adjust The Blade Guides

    2. Turn the air line valve, which allows you to access the air cylinder's quick-release pin, as shown in the following ©Tormach® 2020 Page 44 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 45 If you do, it could cause damage to the bandsaw or the blade. Figure 10-8: Blade cover opened. ©Tormach® 2020 Page 45 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 46: Adjust The Blade Brush

    For information, see "Machine Maintenance" (page 41). To adjust the blade brush: ©Tormach® 2020 Page 46 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 47: Adjust The Jaws

    10.5.2 Adjust the Fixed Clamp Jaw 1. Find a piece of 24 in. stock. We recommend using one of the following: ©Tormach® 2020 Page 47 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 48 8. Remove the clamp from the machine. 9. Remove the stock from the machine. ©Tormach® 2020 Page 48 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 49: Troubleshooting

    TROUBLESHOOTING IN THIS SECTION, YOU'LL LEARN: About common causes of failure in this machine, and our recommendations for diagnosing and correcting them. Before operating the machine in any way, you must read and understand this section. CONTENTS 11.1 Operations Troubleshooting 11.2 Motor and Electrical Troubleshooting...

  • Page 50: Operations Troubleshooting

    11.1.5 Material Doesn't Advance 11.1.6 Material Slips in Vise Clamps 11.1.7 Noise or Problems Moving Through the Cut ©Tormach® 2020 Page 50 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 51: Blades Break Too Frequently

    Then, verify that the vise jaw clamping pressure isn’t set too low for the material. ©Tormach® 2020 Page 51 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 52 Examine the behavior of the machine as it cuts. ©Tormach® 2020 Page 52 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 53: Blades Dull Too Quickly

    If Adjustments" (page 43). blade on the necessary, adjust the tracking. wheels. ©Tormach® 2020 Page 53 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 54: Blades Lose Teeth

    Examine the behavior of the machine as it cuts. ©Tormach® 2020 Page 54 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 55: Cuts Are Crooked

    If necessary, use the tensioner on Blade" (page 28). the top of the saw head to adjust the blade's tension. ©Tormach® 2020 Page 55 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 56: Material Doesn't Advance

    Examine the infeed table for correct alignment. If it's For information, see "Mechanical infeed table. not correctly aligned, adjust it. Adjustments" (page 43). ©Tormach® 2020 Page 56 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 57: Material Slips In Vise Clamps

    During manual operation, verify that the handwheel is For information, see "Manual handwheel. completely tightened. If it's not, tighten it. Operation" (page 37). ©Tormach® 2020 Page 57 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 58: Noise Or Problems Moving Through The Cut

    Examine the Speed" (page 31). behavior of the machine as it cuts. ©Tormach® 2020 Page 58 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 59: Motor And Electrical Troubleshooting

    11.2.3 Machine Doesn't Start or a Panel Breaker Trips 11.2.4 Machine Stalls or It's Underpowered 11.2.5 Noise or Machine Vibration ©Tormach® 2020 Page 59 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 60: Coolant Pump Doesn't Work

    Examine the main fuse. If necessary, replace it. For information, see "Electrical main fuse. Schematics" (page 85). ©Tormach® 2020 Page 60 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 61 For information, see "Electrical wiring. disconnection, or corrosion. If necessary, replace or Schematics" (page 85). repair the wires. ©Tormach® 2020 Page 61 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 62: Error On The Control Panel

    The saw lift timed out. It never reached it's required height. Incorrect user input; cut canceled. To start the operation, press the Cycle Start button twice. ©Tormach® 2020 Page 62 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 63 ×2 LED: Outfeed (retract) proximity sensor ×4 LED: Saw up proximity sensor ×5 LED: Saw down proximity sensor ©Tormach® 2020 Page 63 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 64: Machine Doesn't Start Or A Panel Breaker Trips

    Test the motor. If necessary, repair or replace it. Email support@tormach.com to motor. contact Tormach Technical Support for guidance on how to proceed. ©Tormach® 2020 Page 64 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 65: Machine Stalls Or It's Underpowered

    Tormach Technical Support motor bearings. for guidance on how to proceed. ©Tormach® 2020 Page 65 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 66 Test the motor. If necessary, repair or replace it. Email support@tormach.com to motor. contact Tormach Technical Support for guidance on how to proceed. ©Tormach® 2020 Page 66 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 67: Noise Or Machine Vibration

    Fan If it's damaged or loose, replace it. ©Tormach® 2020 Page 67 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 69: Diagrams And Parts Lists

    DIAGRAMS AND PARTS LISTS IN THIS SECTION, YOU'LL LEARN: About this machine’s components. NOTICE! Only use Tormach-approved parts when making replacements. If you don't replace parts with those listed in this section, you may void your warranty. CONTENTS 12.1 Base Casting Exploded View 12.2 Base Casting Parts List...

  • Page 70: Base Casting Exploded View

    12: DIAGRAMS AND PARTS LISTS 12.1 BASE CASTING EXPLODED VIEW ©Tormach® 2020 Page 70 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 71: Base Casting Parts List

    Gas Spring — Motion Guard (PN 38091) Bracket — Nitrogen Shock Nut, Hex, M6 Nut, Hex, M8 Outfeed Slide Vice Lead Screw ©Tormach® 2020 Page 71 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 72 Screw, Hex Head Cap, M10 × 1.5 - 50 mm Washer, Flat, M10 Stud M12 — Rear Vise Jaw Washer, Flat, M12 Nut, Hex, M12 ©Tormach® 2020 Page 72 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 73: Head Casting Exploded View

    12: DIAGRAMS AND PARTS LISTS 12.3 HEAD CASTING EXPLODED VIEW ©Tormach® 2020 Page 73 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 74: Head Casting Parts List

    Belt Cover Motor Pulley Drive Wheel Pulley Pulley Door Switch (PN 38081) Control Box Control Box Gasket ©Tormach® 2020 Page 74 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 75 Lower Blade Guide Wheel Lower Wheel Axle Upper Blade Guard Lower Motor Mount Upper Motor Mount Drip Guard ©Tormach® 2020 Page 75 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 76 Saw Head Conduit Mounting Bracket Top Pivot Mount – Lift Cylinder Proximity Target – Bottom Position ©Tormach® 2020 Page 76 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 77: Infeed Table Exploded View

    12: DIAGRAMS AND PARTS LISTS 12.5 INFEED TABLE EXPLODED VIEW ©Tormach® 2020 Page 77 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 78: Infeed Table Parts List

    M12 × 3 - 330 mm Acme Length Adjustment Screw (PN 38093) 1/2-10 Acme Speed Nut Body (PN 38092) ©Tormach® 2020 Page 78 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 79 Screw, Hex Head Cap, M06 ×1 - 35 mm Nut, Hex, M12 Washer, Flat, M12 Cord Grip, M16 × 1.5 ©Tormach® 2020 Page 79 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 80: Stand Exploded View

    12: DIAGRAMS AND PARTS LISTS 12.7 STAND EXPLODED VIEW ©Tormach® 2020 Page 80 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 81: Stand Parts List

    Stand Leveling Foot Stand Wheel Handle Electrical and Air Cabinet Coolant Tank Filter, Regulator, Lubricator (PN 38829) ©Tormach® 2020 Page 81 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 83: Pneumatic Schematics

    PNEUMATIC SCHEMATICS IN THIS SECTION, YOU'LL LEARN: About the pneumatic schematics for this machine's pneumatic systems. CONTENTS 13.1 Bandsaw Pneumatics...

  • Page 84: Bandsaw Pneumatics

    Y2 - Work Clamp Solenoid Valve PN 38087 Vise Cylinder Vise Cylinder PN 39381 PN 39381 ©Tormach® 2020 Page 84 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 85: Electrical Schematics

    ELECTRICAL SCHEMATICS IN THIS SECTION, YOU'LL LEARN: About the electrical schematics for this machine’s electronics. CONTENTS 14.1 115 Vac Power 14.2 Controls and Sensors 14.3 Terminal Strips 14.4 Electrical Panel Layout 14.5 Electrical Panel Parts List...

  • Page 86: 115 Vac Power

    14: ELECTRICAL SCHEMATICS 14.1 115 VAC POWER ©Tormach® 2020 Page 86 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 87: Controls And Sensors

    14: ELECTRICAL SCHEMATICS 14.2 CONTROLS AND SENSORS ©Tormach® 2020 Page 87 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 88: Terminal Strips

    14: ELECTRICAL SCHEMATICS 14.3 TERMINAL STRIPS ©Tormach® 2020 Page 88 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

  • Page 89: Electrical Panel Layout

    14: ELECTRICAL SCHEMATICS 14.4 ELECTRICAL PANEL LAYOUT ©Tormach® 2020 Page 89 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...
  • Page 90 Transformer (120 Vac - 24 Vac, 50 VA) K1 Contactor 24 Vac Solenoid (with fittings) (38087) ©Tormach® 2020 Page 90 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A) Specifications subject to change without notice. For the most recent version, see tormach.com/support...

Table of Contents