Storing Stations; To Tune In A Preset Station - Sony ST-H2750 Service Manual

Radio Reception Radio Reception
| Storing Stations
To Tune in a Preset Station
1 Press BAND to select a desired band.
Storing Stations
You can store up to 20 FM stations and 10
AM stations in a desired sequence, so that
you can tune in the stored station directly
by entering the preset station number.
This operation is not possible with the
remote commander.
2 Press MODE 80 that the PRESET
indicator lights up.
3 Press — or + to select the desired preset
station number.
1 Tune in the desired station.
2 Press MEMORY/NEXT To tune in a preset station directly Al
"MEMORY" and the preset station (Possible only with the remote commander)
numbers appear on the display. Sapa i Rie ain a e aS EE 1 Set the TUNER/EQ/CD numeric button
function selector to TUNER.
2 Press BAND to select a desired band.
3 Press the numeric buttons to select the
desired preset station number.
oa While "MEMORY" is on (for several
seconds), press ~ or + to select a
desired preset number.
>
Press MEMORY/NEXT.
"MEMORY" disappears, and the station
is stored.
Repeat steps 1 to 4 for each station to be
stored.
CL nei RN nce en:. "uaiveraceabenanes 1 8
PNET RNS LA Di SERRE
It you cannot store a station successfully
Press MEMORY/NEXT again so that ;
"MEMORY" appears, and then proceed i 4
with steps 3 and 4 above.
Be sure to operate while "MEMORY" is on J
+
Hi
ERRATUM EO
a sieAabaaa: BES Nine
DL eT
When you have selected the wrong preset
station number : é
Press MEMORY/NEXT again and then : j
proceed with the steps 3 and 4. r
To change the preset station
Store a desired station at the desired
preset number by proceeding with the
above steps.
The station previously preset will be
erased.
Erasing only is not possible.
27 = 28