Yamaha PLG150-DR Software Manual page 15

i
"Import" button
Click this to open the "Import" dialog and import voices from an existing Library file. You can
drag-and-drop voices to the Library window.
NOTE More than one of these dialogs can be opened simultaneously.
"Import" Dialog
q
"File Name:" ............. Shows the name of the Library file from which voice data is to be
w
[Open File] button .... Click this to open the "Open" dialog and select a Library file to
e
"Memory:"................. Click this and select the voice group from which voice data is to
r
Voice list.................... This area shows all the voices in the selected Memory as a
To select a block of voices, click the number of the first voice, hold down the [Shift] key, then
NOTE
click the last voice.
t
"Monitor" .................. If you check this box, the bulk data for each voice you select from
NOTE Monitoring will not be possible if the MIDI Out port and other parameters in the Editor Setup
are not set correctly. For further details, see
y
[Close] button........... Click this to close the Import dialog.
imported.
open.
be imported.
scrollable list, in order of voice number. You can select a voice
here and import it directly to the voice list in the Library window
by drag-and-drop. (Multiple voices can also be imported this
way.) You can alternatively copy the voice by selecting it and
pressing [CTRL]+[C] on the computer keyboard, and then switch
to the Library window and press [CTRL]+[V] at the new location
to paste (import) it.
the list will be transferred to your plug-in board for monitoring.
15
page 13.
q
w
e
r
t
y