Related Manuals for RocwooD RWCM180
Summary of Contents for RocwooD RWCM180
- Page 1 CEMENT MIXER MODEL: RWCM180 RocwooD Instruction Manual NOTE: PLEASE READ INSTRUCTIONS CAREFULLY BEFORE USE.
-
Page 2: Safety Warnings & Instructions
SAFETY WARNINGS & INSTRUCTIONS SYMBOL AFFIXED TO THE MACHINE UNDERSTAND YOUR MIXER Read and understand the owner’s manual and labels affixed to the mixer. Learn its application and limitations as well as the specific potential hazards peculiar to it. Become familiar with the controls before operating this mixer. STAY ALERT Do not operate the mixer while under the influence of drugs, alcohol, or any medication that could affect your ability to use... - Page 3 SAFETY WARNINGS & INSTRUCTIONS SYMBOL AFFIXED TO THE MACHINE DRESS PROPERLY Do not wear loose clothing, gloves, neckties or jewelry (rings, wrist watches). They can be caught in moving parts. Protective electrically non-conductive gloves and non-skid footwear are recommended when working. Wear protective hair covering to contain long hair, preventing it from getting caught in machinery.
- Page 4 SAFETY WARNINGS & INSTRUCTIONS SYMBOL AFFIXED TO THE MACHINE DO NOT OVERREACH Keep proper footing and balance at all times when loading or unloading the mixer. Never stand on mixer. Serious injury could occur if the mixer is tipped or if the moving parts are unintentionally contacted. Do not store anything above or near the mixer where anyone might stand on the mixer to reach them.
-
Page 5: Table Of Contents
TABLE OF CONTENTS Safety Warnings & Instructions ………………...…………………………………………….…..2 Electrical Connection ……………………………………………………………………………………...5 Specifications……………………………………………………………………………......5 Contents of Shipping Container …………………………………………………………………..6 Assembly Instructions ………………...…………………………………………………………... 6 Operation Instructions …………………………………………….……………………………..... 9 Maintenance Instructions ………………………………………………………………………....10 Wiring Diagram ………………..…………………………………………………………………...10 Parts Schematic ………………………………………………………………………………....11 The use of an Residual Current Device (“RCD”), ELECTRICAL CONNECTION (earth leakage trip), on 230V electrics is recommended. -
Page 6: Contents Of Shipping Container
CONTENTS OF THE SHIPPING CONTAINER ASSEMBLY INSTRUCTIONS Two people assist in assembly recommended. THE STAND Slide the wheels over the stub axles. Secure with hairpin retainers and flat washers. - Page 7 THE BOTTOM DRUM Slide the bearing block on the shaft. Hold it in place with 42 spiral ring. Carefully, and with two people, set the bottom drum with support arm onto the side supports of the stand as shown, so that the bearing With the frame lying on its side, attach the block slots into the channel provided by the support leg as shown.
- Page 8 Mount the mixing blades inside the bottom drum 2. Screw a M8X20 hex bolt with spring and flat loosely as shown - Two holes are provided at washers into each threaded hole in the the base of the drum into which a M10X20 cross rim/ring gear.
-
Page 9: Operation Instructions
THE TRANSMISSION CASE Loading/Mixing Position For Mortar For Concrete Emptying Position Storage Position Lining up the keyways, slide the transmission case over the pinion shaft. Screw a nut with flat washer on each stud bolt. Secure the lower case bracket to the side support frame by inserting a M8X70 from one side, then flat LOADING washer, lock washer and nut from the other... -
Page 10: Maintenance Instructions
Add the required amount of cement into the MAINTENANCE INSTRUCTIONS drum. Ensure the extension cord is Add the required amount of sand into the always unplugged before the motor drum. cover is removed. Pour the required amount of water into the The drive belt is under constant even tension drum. -
Page 11: Parts Schematic
PARTS SCHEMATIC... - Page 12 PARTS LIST Q'ty Q'ty...
Need help?
Do you have a question about the RWCM180 and is the answer not in the manual?
Questions and answers