Table of Contents
Advertisement
Description & Screws
5
Release the Hooks from the clamping wires at
each point indicated by
side and bottom line of the rear cover (Top Left
& Light : 2 points / Side:18 points / Bottom:18
points) in the order marked as 1~2 using the
Service tool as a lever.
6
Gently lift up the Rear Cover from the bottom
side and then push it toward the upper direction
of TV as the side photo to release all mounting
clips located along the upper side of the Rear
Cover as indicated by
Yellow Circles
along
(Yellow Circles).
Picture Description
1
2
There are 18EA Grooves at intervals of about 10cm INSIDE of
Rear Cover along bottom side of rear cover.
There are Hooks at the same position of Rear Cover along bottom side
:
of Source Cover.
10EA Grooves (which you can insert a samsung service jig into) at
:
each point indicated by Red Rectangles OUTSIDE of Rear Cover.
3. Disassembly and Reassemble
1
2
3-7
Advertisement
Table of Contents
