EasySMX Bayard 2076 (AL-NS2076) - Game Controller Manual

Product Parameters

Bluetooth Connection and Pairing Instructions
Connect Switch

1. Press and hold the Home button for 3 seconds in the off state, the indicator lights 1-4 flash quickly, and enter the Bluetooth pairing mode;
2. Open the Switch and select "Controller" and then select"Change Grip/Order". The controller automatically recognizes and pairs with the Switch host. After the connection is successful, the corresponding channel LED light is always on.

Connect your phone

Android mode: A+home, enter the Bluetooth pairing mode, LED2 LED3 light flashes, after the connection is successful, LED2 LED3 light is always on;

IOS mode: X+home, enter bluetooth pairing mode, LED1 LED4 light flashes, after the connection is successful, LED1 LED4 light is always on; Note: IOS only supports system versions above 13.0

Connect to PC
Connect the controller to the PC via a USB cable, the indicator light will be on after the connection is successful, the default Xinput mode, Led1 +Led4 lights; long press the "+ key" and "- key" combination for 5 seconds, switch to Dinput mode, Led2 and Led3 light is on.
Steam platform (SWITCH mode): Press and hold the controller R3 key (right 3D joystick down key) in the shutdown state, use the USB
data cable to insert the connection, and then release the R3 key,
then the LED1 light is on, and the audio can be used Features.

Turbo Button Settings
Press the function key + T key, the function key enters the Turbo burst function.

Turbo setting steps:

1. Press the function key + T key for the first time to enter the semi-automatic burst function;
2. Press the function key + T key for the second time to enter the automatic burst function;
3. Press the function key + T key for the third time to cancel the Turbo burst function.

Clear all Turbo functions: Press and hold the T key for 5 seconds to cancel the burst function of all function keys;
Note: Function keys can be set: A key, B key, X key, Y key, RB key, LB key, RT key, LT key, cross direction key

Motor Vibration Intensity Adjustment
Vibration 3 gear settings: strong, medium (default), weak
Vibration setting method: press the vibration button, the vibration intensity is switched, the conversion order: medium ---- strong ---- weak (only switch mode supports vibration switching)

Macro Definition Programming Settings

1. Turn on/off programming
   Toggle the programming key switch on the back of the controller to "ON" to open; toggle the programming key switch to "OFF" to close,
2. Macro definition programming key single key setting steps
   1. Press the "SET" button, LED2, LED3 lights up, enter the macro definition programming function;
   2. Press the MI/M2 key once, the LED2 will turn on, indicating that the MI/M2 keystroke key has been selected, and the function key is to be set;
   3. After pressing the function key that needs to be mapped, press the "SET" key again to exit the programming setting mode, the LED light will return to the channel indicator state, and the one-key programming setting is successful.
3. Program key macros to define multiple function key setting steps
   1. Press the "SET" button, LED2, LED3 lights up, enter the macro definition programming function;

2. Press the MI/M2 programming key once, and LED2 will turn on, indicating that the MI/M2 programming key has been selected, and multiple function keys will be selected to be set;
3. Press the 1st function key + the 2nd function key + the 3rd function key +..N function keys (Note: the difference between the two function keys is based on the function keys pressed before and after Time mapping, the user can define the trigger interval time of the two function keys when setting), press the programming "SET" setting key again, exit the programming setting mode, the LED light restores the channel indicator state, and the multi-key macro definition function is successfully set