Advertisement
1.2.23.3 All Note Off
This message turns off all notes currently on for the specified channel.
However if Hold 1 or Sostenuto are on, notes will continue sounding until these are
turned off.
1.2.23.4 Omni Off
Perform the same processing as when All Note Off is received.
1.2.23.5 Omni On
Perform the same processing as when All Note Off is received.
1.2.23.6 Mono
Perform the same processing as when All Sound Off is received, and if the 3rd byte
(mono number) is in the range of 0~16,
set the applicable channel to Mode 4 (m = 1).
1.2.23.7 Poly
Perform the same processing as when All Sound Off is received, and set
the applicable channel to Mode 3.
If the Multi Part parameter Rcv PROGRAM CHANGE = OFF, that Part will not receive
Program Changes.
If Sound Module Mode = C/M, all Program Changes for the Drum Voice Part are
ignored.
If the Multi Part parameter Rcv PITCH BEND CHANGE = OFF, that Part will not
receive Pitch Bend messages.
With the default setting there will be no function.
If the Multi Part parameter Rcv CHANNEL AFTER TOUCH = OFF,
that Part will not receive Channel Aftertouch.
With the default setting there will be no function.
If the Multi Part parameter Rcv POLYPHONIC AFTER TOUCH = OFF,
that Part will not receive Polyphonic Aftertouch.
There will be an effect only for note numbers 36-97.
2. System Exclusive Messages
This device uses the following parameter changes.
[ UNIVERSAL REALTIME MESSAGE ]
1) Master Volume
[ UNIVERSAL NON REALTIME MESSAGE ]
1) General MIDI Mode On
2) Identity Request(INQUIRY MESSAGE)
3) Identity Reply(INQUIRY MESSAGE)
[ XG NATIVE ]
1) XG System on
2) XG System Data parameter change
3) System Information
4) Multi Effect1 Data parameter change
5) Display Data parameter change
6) Multi Part Data parameter change
7) Drums Setup Data parameter change
[ MU80, MU50 NATIVE ]
1) MU80, MU50 System data parameter change
2) Current Performance parameter change
3) Remote switch
[ Other ]
1) Master tuning
2) TG300 System Data Parameter change
3) TG300 Multi Effect Data parameter change
4) TG300 Mutli Part Data parameter change
5) Disk Orchestra On
2.1.2.1
Master Volume
11110000
F0
01111111
7F
01111111
7F
00000100
04
00000001
01
0sssssss
*SS
0ttttttt
TT
11110111
F7
or,
11110000
F0
01111111
7F
0xxxnnnn
XN
00000100
04
00000001
01
0sssssss
SS
0ttttttt
TT
11110111
F7
When this is received, the Volume MSB will be reflected in the System Parameter
MASTER VOLUME.
* SS is the hex expression of 0sssssss Same for others
2.1.3.1
General MIDI Mode On
11110000
F0
01111110
7E
01111111
7F
00001001
09
00000001
01
11110111
F7
or,
11110000
F0
01111110
7E
0xxxnnnn
XN
00001001
09
00000001
01
11110111
F7
When On is received, the SOUND MODULE MODE will be changed to XG mode.
Ignored when in C/M mode.
Not received when Rcv GM EXCLUSIVE = OFF
Since approximately 50 ms is required to execute this message, leave an appropriate
interval before the message that follows it.
2.1.3.2
Identity Request
11110000
F0
01111110
7E
0ccccccc
ccccccc
00000110
06
00000001
01
11110111
F7
When this message is received, this device will
transmit the following 2.1.3.3 Identity Reply message.
2.1.3.3 Identity Reply
11110000
F0
11111110
7E
0nnnnnnn
0nnnnnnn
00000110
06
00000010
02
01000011
43
00000000
00
01000001
41
01000110
46
00000001
01
00000000
00
00000000
00
00000000
00
00000000
01
11110111
F7
This device transmits this message when it receives a 2.1.3.2 Identity Request message.
12
= Exclusive status
= Universal Real Time
= ID of target device
= Sub-ID #1=Device Control Message
= Sub-ID #2=Master Volume
= Volume LSB
= Volume MSB
= End of Exclusive
= Exclusive status
= Universal Real Time
= Device Number, xxx = don't care
= Sub-ID #1=Device Control Message
= Sub-ID #2=Master Volume
= Volume LSB
= Volume MSB
= End of Exclusive
= Exclusive status
= Universal Non-Real Time
= ID of target device
= Sub-ID #1=General MIDI Message
= Sub-ID #2=General MIDI On
= End of Exclusive
= Exclusive status
= Universal Non-Real Time
= Device Number, xxx = don't care
= Sub-ID #1=General MIDI Message
= Sub-ID #2=General MIDI On
= End of Exclusive
= Exclusive status
= Universal Non-Real Time
= Device Number
= General Information
= Identity Request(Sub-ID #2)
= End of Exclusive
=Exclusive status
=Universal Non-Real Time
=Device Number
=General Information(Sub-ID #1)
=Device Identity Reply(Sub-ID #2)
=YAMAHA ID
=Device Family Code LSB
MU50ID#1
=Device Family Code MSB
MU50ID#2
=Device Number Code LSB
MU50ID#3
=Device Number Code MSB MU50ID#4
=XG ID
=End of Exclusive
Advertisement
