Operation; To Charge The Product; To Operate The Product - Kayoba 025603 Operating Instructions Manual

3

Operation

3.1 To charge the product

Charge the product before the first use.
1
Connect the charging cable type USB C - USB A to the
charging port type C on the product.
2
Connect the charging cable to a power plug with an
USB A port (not included).
3
Connect the power plug to a power outlet. The battery
starts to charge and the power indicator on the product
will light red. When the battery is fully charged the
power indicator will light green.
4
Disconnect the power plug from the power outlet.
5
Disconnect the charging cable from the product.

3.2 To operate the product

1
Push the power switch to start the product. The
product will shine with half brightness.
2
Push the power switch again to make the product shine
with full brightness.
3
Push the power switch to turn off the product.
2023_001
EN
27