Setting Up; Setup Procedure; Setup Examples - Yamaha MG8/2FX Owner's Manual

Setting Up

Setting Up

Setup Procedure

1
Before connecting to microphones and instruments, be
sure that all devices are turned off. Also be sure that all
of the channel controls and all of the controls in the
Master Control section are turned to their minimum
settings.
2
For each connection, connect one end of the cable to
the relevant microphone or instrument and connect the
other end to the appropriate input jack on the mixer.

Setup Examples

Rhythm Machine
Microphone
Guitar
20
MG8/2FX
Sound Source (CD, MD,
DAT, Cassette, Video, etc.)
Synthesizer
MTR
Where an input channel provides both a MIC
NOTE
INPUT jack and a LINE INPUT jack, you may use
either one of these jacks but you may not use both
at the same time. Please connect to only one of
these jacks on each channel.
3
To avoid causing damage to speakers, power up the
devices in the following order: Peripheral devices →
mixer → power amps (or powered speakers).
When shutting the system down, turn off the power
NOTE
in the opposite order: Power amps (powered
speakers) → mixer → peripheral devices.
Sound Source (CD, MD,
DAT, Cassette, Video, etc.)
Master Recorder
(MD, CD-R, DAT, etc.)
Foot Switch
(YAMAHA FC5)
Powered Monitor
Speakers
Headphones
Effector