Factory Reset; Functional Tests; Data Map - Idem NET-BOX-CS Operating Instructions Manual

Operating Instructions
NET-BOX-CS

Factory reset

Please consult the instruction manual of the application control software or for further assistance please
contact technical@idemsafety.com

Functional Tests

Once the device has been installed and setup within the EtherNet IP / CIP Safety application control
software the following checks are necessary to ensure correct operation of the system.
•
Secure mounting of NET-BOX with lid screws correctly tightened.
•
Confirm correct operation of each safety input device including the lid mounted E-Stop (if fitted).
•
Expected operation of all control circuits.
6

Data Map

See technical datasheet supplied with product. For assistance please contact:
technical@idemsafety.com
102638 2305 NET-BOX-CS Operating Instructions
IDEM Safety Switches
9