Table of Contents
Advertisement
Operating Instructions
NET-BOX-CS
5.
Set the device name (customisable – 'NET-BOX-CS' used as example only) and set the
previously configured IP address.
6.
Change the Safety Network Number (SNN) to match that of the controller/PLC.
7.
On the 'Safety' tab, uncheck the 'Configuration Signature' box, press OK.
8.
The NET-BOX can now be utilised in the PLC program according to the NET-BOX data mapping.
102638 2305 NET-BOX-CS Operating Instructions
IDEM Safety Switches
8
Advertisement
Table of Contents
