Advertisement
SH-8045
oma
Ww
a
ww
. Remove the cabinet and front panel.
. Remove the power supply knob and 4 setscrews (Fig. 4 :
. Pull the 2 connectors out of the main P.C.B.
. Remove the 2 setscrews (Fig. 4 : @ , @ ) of the switch
. Pull out the 12 knobs for the right and left channels,
. Remove the ornament
panel by pressing the right and
. Remove the 8 setscrews for the volume and detach the
How to remove the slide volume
@® ~ @®) of the front plate.
and remove the front plate from the chassis as in Fig. 3.
totalling 24 knobs.
left claws (@ & ©) from the inside of the chassis as in
Fig. 5.
(There are 2 ornament panel.
Remove another
panel in the same manner.)
volume along with the P.C.B. from the front plate.
Connector
Fig. 4
rnament
&. pane!
Setscrews x 8
Knob
Fig. 5
How to remove the regulator
. Remove the main P.C.B.
. Unsolder the regulator (Q3, 4) at 3 portions and the radiation plate at 1
portion. (Fig. 6)
. Remove the regulator along with the readiation plate, and the setscrews.
. When
soldering the regulator,
apply silicone
compound
(or equivalent
heat diffusing agent) to the back of regulator.
Unsolder
Radiation
ay
®
Regulator
Spacer
Setscrew
Fig. 6
Advertisement
