Yamaha GO46 Owner's Manual page 16

Connectors and controls
N
DIGITAL OUT jack
This digital audio jack is for the digital output of audio signals. The interface can transmit sam-
ple rates of up to 24-bit/96 kHz.
For playback, set the routing in the Control Panel to the digital output. AC3 and DTS can also
be played back via the digital output. Select "NON AUDIO" for the digital output in the Con-
trol Panel under "ROUTING". (See page 22.) The non-audio signals are not sent to the analog
outputs.
O
IEEE1394 (FireWire) port
Connects the GO46 system to your computer using the included IEEE1394 (FireWire) cable.
P
MIDI IN jack
Connects MIDI devices such as MIDI keyboards and DAW controllers. For connecting MIDI
devices, connect the MIDI OUT terminal of the MIDI device to this jack using a MIDI cable.
Q
MIDI OUT jack
Connects to MIDI devices such as synthesizers and tone generators. For connecting MIDI
devices, connect the MIDI IN terminal of the MIDI device to this jack using a MIDI cable. Con-
ventional DAW applications usually allow you to route incoming MIDI data through the OUT
jack, using the Thru (or MIDI Echo) function.
R
DC IN jack
Connects the AC power adaptor to this jack.
16