Output & Settings - Yamaha GO46 Owner's Manual

DAW IN 1/2, 3/4, 5/6
Here you can adjust the levels of the output signals sent from DAW applications.
As with the ANALOG IN / DIGITAL IN, a separate fader is available for each mono channel. The
individual channels can be joined using the switchable stereo link function (the [PAIR] button).
While the stereo link function is active, faders and mute operations are linked.
To send the mixed signal, [DIGITAL MIXER] must be assigned in the ROUTING section of the
Output & Settings window. (See page 22.) If [DIGITAL MIXER] is not assigned for any outputs,
the operation of the digital mixer is ignored.
MASTER
The overall playback level of the digital mixer can be set with the Master control. You can use the
stereo link function and mute operation.
Output & Settings
In the Output & Settings page, you can change sample rates, route inputs to outputs, and adjust
output levels.
MASTER CLOCK
This controls the sample rate used by the GO46. When digital inputs are not used, click the
[INTERNAL] button and select from all commonly used sample rates from 32 to 192 kHz from the
pull-down menu.
When external devices such as DAT recorders are connected, click the [EXTERNAL] button. The
external sample rate is displayed in the box next to the [EXTERNAL] button. If no signal is
available or the connection has been interrupted, the message "--------" will be returned.
If the setting is correctly working, the SYNC indicator lights up.
NOTE
• When a sample rate of 192kHz is selected, only the ANALOG IN (for audio inputs) and DAW IN 1/2 (for
audio outputs) columns are available.
• When a sample rate of 192kHz is selected, avoid using MIDI inputs and outputs since this may cause some
noise and glitches in the sound.
GO46 Control Panel
21