Advertisement
THE METALCRAFT TRIMMER / TOOL TIPS
HOW TO USE THE
METALCRAFT TRIMMER
BEFORE USING
• Always inspect the trimmer blades for noticeable signs of damage.
• Always inspect the trimmer blades before use to ensure they are free from hair, debris
etc.
• Ensure the trimmer is sufficiently charged before use.
• For best performance use on clean, dry hair that has been combed until tangle-free.
OILING THE BLADES
To get the sharpest, most precise cut, it is highly recommended to oil the blades about
once a month.
Using the oil supplied with your new tool, unscrew the cap & cut off the very end of the
plastic tube with a pair of scissors to release the oil.
Switch your tool on, gently squeeze the oil tube & apply 2 drops of oil onto the blades.
Leave the tool on for a further few seconds to allow the oil to thoroughly spread across
each of the blades. Switch off the tool & remove any excess oil by gently dabbing with a
cloth.
8
Advertisement
