Advertisement
PREPPING YOUR
NEW TOOL
CHARGING
The MetalCraft Trimmer is so easy to use. But before you start using your new
tool, you must take the time to charge it overnight for 3 hours before its first
use. Your new tool comes with a small amount of charge, but the initial charge
will ensure your new tool will have optimum power performance to give you
smooth fast cutting, every time.
- Before using for the first time, fully charge your new tool continuously 3
hours.
- Maximum battery capacity will only be reached after 3 charging &
discharging cycles.
- Ensure your new tool is switched off.
- Insert the small plug on the charging adaptor into the socket on the bottom
of your new tool.
- Plug the charging adaptor into a suitable mains power socket & switch on. If
the battery is very weak, wait about 1 minute.
- The blue charging LED indicator light on the trimmer will flash when
correctly connected. When it is fully charged, the blue charging LED indicator
light will stay blue and stop flashing.
- A full charge of 3 hours will supply up to 100 minutes cordless runtime.
- To maintain optimum capacity of the rechargeable battery, it is highly
recommended to fully discharge & then recharge your tool for 3 hours every
3 months.
- When the trimmer is running low on a charge, the LED indicator light
will flash, warning that there is approximately 6 minutes of battery use
remaining.
THE METALCRAFT TRIMMER / TOOL TIPS
7
Advertisement
