Advertisement
TRIMMER CLEANING &
MAINTENANCE
Because the trimmer blades are precision made for a very special use, they
should always be handled with care. To ensure long-lasting performance of your
trimmer, it is important to clean the blades + the comb guides after every use.
After each use, clean the trimmer blade set as follows:
1. Switch the trimmer off or unplug from the power outlet if it is charging.
2. Remove the blade set from the trimmer by placing your thumb against the
smaller cutter & pushing forward, releasing the blade set from the trimmer
housing.
3. Using the cleaning brush, gently brush & blow any hairs from the blade set &
head of your trimmer.
4. To replace the blade set, place your thumb on the large blade and snap into
place.
5. Do not disassemble the blades for cleaning.
6. After replacing the blade set, always remember to oil the blades of your
trimmer.
THE METALCRAFT TRIMMER / TOOL TIPS
13
Advertisement
