Checking brake-fluid level
A low fluid level in the brake reservoir can allow air to penetrate the brake
system.
This significantly reduces braking efficiency.
To check level, turn the handlebars to a straight-ahead position and hold
motorcycle upright.
Check the fluid level in the front brake master cylinder is above the minimum
marker (1).
1
Check the fluid level in the rear master cylinder is above the minimum marker (1)
27
Coolant
Risk of burns from escaping coolant!
The hot cooling system is pressurised.
Allow the coolant to cool down before opening the radiator cap.
Make sure the ground is flat and level, hold the motorcycle vertical.
Once the radiator has cooled, remove the cap (1) by turning it
counterclockwise.
Ensure correct coolant level is maintained.
Coolant minimum level is defined by the internal top plate. Maximum level is
40mm below top cap.
40mm
1