Hazet 7901 E Operating Instructions Manual page 21

3. Dangers that may arise from
using the tool
Before each use, check the
torque tester for full functionality.
Do not use the tool if its
functional efficiency (according
to the test results) cannot be ensured or if damage
is detected. If it is determined that the tool is not
in good working order but the tool is used despite
this, there is a danger of serious damage to body,
health and property.
• Electronic torque testers are calibrated measuring
instruments and must be handled with care. Avoid
any mechanical, chemical and thermal exposure
that goes beyond the stresses of normal use.
• The electronic torque tester must not be exposed
to rain, moisture or liquids. Do not allow any
foreign bodies to penetrate it and always ensure
that unused connectors are covered. Extreme
climatic conditions such as cold, heat and humidity
can have an effect on measurement values/results.
Failure to comply with these instructions can result
in damage to or destruction of the torque tester.
• Only transport the torque tester in its case and
ensure that it does not fall during transportation.
Avoid any mechanical shock effects such as hard
impacts or falls. Failure to comply can damage
electronic components of the tool.
For your safety
1
21