Table of Contents
Advertisement
MIDI
7. MIDI
MIDI connection is possiblevia the MIDI sockets IN/OUT/THRU (15). The MIDI functions within the Fx 70 allow the
appliance to be controlled externally. The diverse and flexible possibilities mean that all functions can be controlled
from a MIDI-compatible unit (e.g. computer, sequencer, keyboard...). E.g.
- Switching over programms
- Changing certain parameters
- Switching the effect signal on or off
- Switching over the rotor speed
- All control elements (remote control of the Fx 70)
and many, many more.
Should you still not have had any experience with MIDI we recommend that you first gather information on MIDI
standards and interfaces (e.g. MIDI books, computer and music journals etc.) There is also a brief explanation in
the annex, chapter 9).
7.1 BASIC SETTINGS
Pressing the MIDI key briefly puts the MIDI channel or
mode on the display (5). Alterations can be made via the
rotary control (9) and take effect immediately.
The following settings are possible:
"-" no MIDI evaluation (MIDI OFF)
"on" MIDI reception in Omni Mode (all channels are
received)
"0T - "16" reception on MIDI channel 1-16
The selected MIDI channel setting can be saved in the
memory via the button "STORE" (see 5.4). If no other
parameter is to be altered, perform the following se¬
quence.
Push a program key (e.g. 1), the STORE key and then
the same program key again.
This will store the program (e.g. 1), into the same me¬
mory place and the new MIDI channel setting is saved a
global MIDI allocation (see 4.1, 5.4).
If the STORE key is pressed for approx. 3 sec., the MIDI
channel is set to OMNI mode (see 5.4).
7.2 MIDI INPUT CONTROL
If there are data on the MIDI INPUT (15) which comply
with MIDI channel or mode selected in the Fx 70, the
decimal point of the display (5) lights up briefly.
ROTOR
SPEED
SPEED
DISTCR-ROOM —BALANCE—BASS
TREBLE-MO
STORE
VALUE
7.3 REMOTE CONTROL VIA MIDI
All Fx 70 parameters and keys can be remote controlled
in real time via the MIDI INPUT (15). This necessitates
a MIDI-compatible device as a MIDI transmitter.
To control the Fx 70 via a MIDI Controller, this allocation
takes place in LEARN MODE.
All MIDI CONTROLLERS or MIDI functions (note
on/off...) can be used to control the Fx 70.
7-1
Advertisement
Table of Contents
