Table of Contents
Advertisement
PAR AM. 37 = POSITION-CONTROL BASS
PARAM. 38 = POSITION-CONTROL TREBLE
These two parameters allow a visual check of the posi¬
tion of the rotors in the display (5). The bass rotor is
indicated in the tens digit, the treble rotor in the units digit,
if the rotors are switched to "STOP", the position can be
altered manually via the rotary encoder (9). If "STOP
DIRECTION" is switched to 0 (parameter 36), the edited
position is maintained.
PARAMETER 39 = SPEEDO-CONTROL-BASS
PARAMETER 40
=
SPEEDO-CONTROL-TREBLE
These two parameters allow a visual check of the speed
of the rotors in the display (5). Values displayed can
range between 0 (standstill) to 99.
PARAM. 41 = LEVEL-PEAKHOLD-TIME
This parameter sets the hold time of the Peak LED in the
input level meter (3). Settings are possible between 0
and 42 (1 step = 0.1 sec.). "STORE" saves this hold time
(global parameter).
PARAM. 42 = RECEIVE - REMOTE - SYSEX
This switch activates the remote control feature via MIDI
SYSEX data (=1). The value 0 blocks the reception of
remote control data.
Advertisement
Table of Contents
