Dtxpress Iv Special Set; Setting Up With Acoustic Drums - Yamaha DTXPRESS IV Owner's Manual

Attaching the Module Stand
Attach the included module stand to
the DTXPRESS IV using the module
stand fastening screws.
* Be sure to use the included screws.
To 7HI HAT
* First, connect the RHH130's [PAD]
output jack to the 7 HI HAT jack on
the DTXPRESS IV, then connect the
RHH130's [HI HAT CONTROL] out-
put jack to the HI HAT CONTROL
jack on the DTXPRESS IV.
The DTXPRESS IV can be played from an acoustic drum kit if the kit is fitted with an optional set of drum triggers (such as Yamaha DT20
Drum Triggers) and the triggers are properly connected to the input jacks of the DTXPRESS IV.

DTXPRESS IV Special Set

DTXPRESS IV
Module stand
(included)
Module stand fastening screws
(2; included)
To 6CRASH
To HI HAT
CONTROL
To 1SNARE

Setting up with Acoustic Drums

CAUTION
When assembling the Special Set, the legs
of the rack must be slid backwards to
maintain proper balance of the set. For
details, refer to the assembly instructions
of the rack system.
To 2TOM1 To 3TOM2
To 8KICK
* Foot pedal is not included in the
Special Set.
DTXPRESS
1 Connections
To 5RIDE
To the external pad input
jack of KP65 (kick pad)
To 4TOM3
11
IV
Owner's Manual