Advertisement

Quick Links

Gogoro GX250 Series Electric Scooter
User Manual
Release Date: 2023.07.03
Applicable Models:
GX250
Manufacturer: Gogoro India
Copyright© 2023 Gogoro India. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GX250 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Gogoro GX250 Series

  • Page 1 Gogoro GX250 Series Electric Scooter User Manual Release Date: 2023.07.03 Applicable Models: GX250 Manufacturer: Gogoro India Copyright© 2023 Gogoro India. All rights reserved.
  • Page 2: Table Of Contents

    4.5 Low Battery Mode 5. Replenish Electricity 5.1 Swap Batteries at GoStation® 5.1.1 Using the Gogoro® App to Find a GoStation® 5.1.2 Use the Screen on One GoStation® to Find Others 5.1.3 Battery Swapping 5.2 Charging the Gogoro Network® Battery 5.2.1 Charge the batteries with GoCharger®...
  • Page 3: Before You Hit The Road

    1. Before You Hit the Road Welcome to your new Gogoro! Let us walk you through the right steps to operate your scooter safely and maximize your riding experience. Please read this manual carefully before you hit the road and make sure you meet all the following requirements: ●...
  • Page 4: Safety Notice

    Perform basic inspections before every ride. Check lightings, brakes, tire tread and tire pressure, as well as other potentially loose parts. Return to the Gogoro designated service center if maintenance or repairs are necessary.
  • Page 5 1.3 Check the Following Before Every Ride ● Make sure the tire pressure is within normal range, the suggested pressure: ○ Gogoro GX250 series: Front 33 psi, rear 36 psi. ● The tire surface has no crack, damage, excessive abrasion, object punctures or attachments.
  • Page 6: Get To Know Your Scooter

    2. Get to Know Your scooter Gogoro electric scooter is the world’s first high performance, zero emission smart two-wheel vehicle, and the first Gogoro Network® integrated product. Before actually using it, please get familiar with its operation and information display.
  • Page 7: Left Handle

    2.2 Left Handle High / Low Beam ● Press to switch the headlight between low beam and high beam. ● Press and hold it, the low and high beam will continue to flash to remind the vehicle or pedestrian in front of you. Turn Signal ●...
  • Page 8: Dashboard

    2.4 Dashboard Icon Name Function Description When system power is on, hold down the brake and press this button to turn the motor on / off. Start Button When the motor is off, press and hold the Smart button and press this button at the same time to quickly turn off...
  • Page 9: Getting Ready To Go

    3. Getting Ready to Go 3.1 Turn On the System Power and Unlock the Handle ● If the main key switch has a keyhole shutter, use the magnetic tip of the key to open it and you’ll see the keyhole exposed. ●...
  • Page 10: On The Road

    4. On the Road 4.1 Using the Stands Before you start riding the scooter, you must first retract the side stand and main stand. After you finish riding, you must park the scooter steadily with the side stand or main stand expanded.
  • Page 11: Turn On / Off The Motor

    4.2 Turn On / Off the Motor After the system power is on, you still need to turn on the motor before you ride. After you finish riding, you also have to turn off the motor, then you can turn the system power off and lock the scooter.
  • Page 12: Forward And Backward

    4.3 Forward and Backward 4.3.1 Electronic Throttle ● Make sure the system power is on, and turn the motor on. The dashboard speedometer should display “0”. ● Gently turn the throttle and the scooter will go forward. The power and throttle response of scooter are different from traditional gasoline engine vehicles.
  • Page 13: Synchronized Braking System (Sbs)

    Different models may be equipped with different brake assist systems, including SBS and ABS. If you don’t know which system is on your vehicle, please consult your local dealer. 4.4.1 Synchronized Braking System (SBS) ● The SBS (Synchronized Braking System) can distribute a part of the force of the rear brake ( left brake lever) to the front brake and reduce the chance of rear wheel skidding under certain conditions.
  • Page 14: Replenish Electricity

    5.1 Swap Batteries at GoStation® 5.1.1 Using the Gogoro® App to Find a GoStation® You can use the Gogoro® App on your smartphone to find the location of the nearby GoStation®. ● Click the "Map" icon in the lower right corner of the main screen to check whether the nearby GoStation®...
  • Page 15: Use The Screen On One Gostation® To Find Others

    If you have arrived the GoStation® but you find out that "All batteries are charging", and there is no fully charged battery for you to swap, except using the Gogoro® App, you can also check the location and battery information of other nearby GoStation® sites by pressing "Support" in the upper right corner of the touch screen.
  • Page 16: Battery Swapping

    5.1.3 Battery Swapping After you ride the scooter to the GoStation®, please follow the steps below to swap the batteries. Step 1. Take out the battery(s) from the scooter ● Park the scooter steadily by the GoStation®. ● Turn off the motor with the side stand expanded, or hold the brake lever and press the "Start Button".
  • Page 17 ● After all the batteries are inserted into the GoStation®, authentication and data upload will be performed. At this time, the screen will display the remaining battery level, the riding mileage of the previous trip, and the total mileage, then pop out new battery(s). ●...
  • Page 18 Please be sure to swap the batteries at least once every 30 days. If you expect not to use the scooter for more than 30 days, you can contact Gogoro Network® to suspend your energy service contract.
  • Page 19: Charging The Gogoro Network® Battery

    ● Connect the GoCharger® with a wall AC socket using the AC cord. ● When the “Power Indicator” lights up, it means that the GoCharger® is powered up. ● Pull out the Gogoro Network Batteries from the scooter, and then insert them into the slots of the GoCharger®.
  • Page 20 ● Do not use any kind of scouring pad, steel wool, brushes, detergent, solvent or wax on any part of GoCharger®. It is strictly forbidden to use charging methods that are not officially approved by Gogoro Network® to avoid danger.
  • Page 21: Maintenance

    ● If you are not able to leave all the Gogoro Network® Battery(s) for a long period of time, it is suggested that you ask Gogoro authorized technicians to disconnect the built-in primary battery, to avoid the damage of the built-in primary battery caused by over-discharging.
  • Page 22: Gx250 Series Regular Service And Maintenance

    6.2 GX250 Series Regular Service and Maintenance You will be notified of regular maintenance time by the Gogoro® App and GoStation®. You can go to the nearest Gogoro service center for inspection and routine maintenance. ● Newly delivered scooter should return to a Gogoro service center for its first inspection after 5,000 kilometers or 6 months (whichever comes first)..

Table of Contents